Bobrick B-58616.99 Specifications

PRODUCT SPECIFICATION

Stainless steel grab bar. 1-1/4" (32mm) diameter, with snap
flange cover, Horizontal two-wall 24" x 36" (610 x 914 mm),
Bobrick Model B-58616

Grab bar and concealed mounting plates shall be constructed of
type-304 stainless steel with satin finish (or satin finish with peened
gripping surface; add .99 suffix to model number). Grab bar shall
have wall thickness of 18-gauge (1.2mm) and outside diameter of
1-1/4" (32mm). Distance from inside of grab bar to finished wall
shall be 1-1/2" (38mm). Flanges shall be 1/8" (3mm) thick
stainless steel plate, 2" x 3-1/8" (50 x 79mm) in diameter, and each
shall have two screws holes. Flange covers shall be 22-gauge
(0.8mm) and shall snap over mounting flanges to conceal mounting
screws. Grab bar shall have 90° return to flange. Ends of grab bar
shall pass through flanges and be heliarc welded to form one
structural unit.