Bobrick B-544 User Manual

Technical Data

ToileT Brush

holder

105mm
4-1/16''

Cylinder Mounting Screw
2 Required

95mm
3-3/4''

(secures Cylinder to Wall Bracket)

Finished Face of Wall

10mm

3/8''

B-544

Plastic Liner

Toilet Brush

90mm

3-9/16''

405mm

16''

125mm

5''

40mm

1-5/8''
85mm
3-3/8''

Wall Mounting Bracket

Stainless Steel Cylinder

S

50mm

2''

S

30mm
1-1/4''

MATeriAl:

Toilet Brush — 18-8 S, type-304, 9.5mm (3/8") diameter, stainless steel handle with satin-finish, threaded into toilet brush
head.

Plastic Liner — Leak-proof molded polyethylene. Supports Toilet Brush to maintain it in a vertical position. Removable for
cleaning.

Cylinder — 18-8 S, type-304, 1.2mm (18-gauge) stainless steel with satin-finish, seamless construction.

Wall Bracket — 18-8 S, type-304, 1.5mm (16-gauge) stainless steel with satin-finish. Equipped with screws to secure cylinder.

iNsTAllATioN:

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.

For partitions with par ticle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished)
can be secured.

sPeCiFiCATioN:

Toilet Brush Holder shall be type-304 stainless steel with satin finish. Toilet Brush Holder shall have 9.5mm (3/8") diameter
toilet brush handle threaded into toilet br ush. Unit shall be equipped with a removable, leak proof plastic liner to hold toilet
brush in ver tical position. Cylinder shall be 1.2mm (18-gauge), seamless construction. Cylinder shall be secured to the wall
with screws secured into wall plate.

Toilet Brush Holder shall be Model B-544 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.