Bobrick B-543 User Manual

Technical Data

85mm
3-3/8''

ToileT Tissue

Dispenser

Finished Face of Wall

70mm
2-3/4''

Dispenser Bar

120mm

4-13/16''

Concealed Setscrew

Flange

Cover

Post

19mm

3/4'' Dia.

Retaining Pin

35mm

1-5/16''

24mm
15/16''

49mm

1-15/16'' Dia.

B-543

Mounting

Flange

S

S

35mm

1-5/16''

13mm

1/2''

130mm

5-1/8''

10mm

3/8''

MATeriAl:

Post — 18-8 S, type-304, 19mm (3/4") diameter, solid stainless steel rod with satin-finish. Post and Concealed Mounting
Threaded Flange are machined as one piece.

Dispenser Bar — 18-8 S, type-304, 9.5mm (3/8") diameter, solid stainless steel rod with satin-finish. Secured to Post with a
concealed set screw allowing for right or left handed assembly.

Retaining Pin — 18-8 S, type-304, 6.4mm (1/4") diameter, solid stainless steel rod with satin-finish press fit and secured into
Dispenser Bar.

Concealed Mounting Threaded Flange — 18-8 S, type-304, 5.6mm (7/32") thick, stainless steel plate with thread on outside
edge for fastening cover. 46mm (1-13/16") outside diameter with two holes for attachment to wall.

Threaded Flange Cover — 18-8 S, type-304, 1.4mm (17-gauge), machined stainless steel with satin-finish. 49mm (1-15/16")
diameter 13mm (1/2") deep. Cover fastens over mounting flange to conceal mounting screws.

insTAllATion:

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8") toggle bolts or expansion bolts.

For partitions with par ticle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished)
can be secured.

speCiFiCATion:

Toilet Tissue Dispenser shall be type-304 stainless steel with satin finish. Toilet Tissue Dispenser shall have 19mm (3/4")
diameter Post. Dispenser bar shall be 9.5mm (3/8") diameter, secured to Post with a concealed set screw allowing for right
or left handed assembly. Retaining pin shall be 6.4mm (1/4") diameter and pressed into Dispenser bar. Concealed mounting
flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes
for attachment and thread on outside edge to fasten cover. Threaded flange cover shall be 1.4mm (17-gauge) stainless steel,
49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws. Post and mounting flange are to
be machined as one piece.

Toilet Tissue Dispenser shall be Model B-543 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.