Bobrick B-542 User Manual
Technical Data
Coat Hook
Finish Face of Wall
Mounting Flange
13mm
1/2''
Hook Pin
19mm
3/4''
Dia.
B-542
27mm
1-1/16''
49mm
1-15/16''
Dia.
S
33mm
1-5/16''
MatERIaL:
Post — 18-8 S, type-304, 19mm (3/4") diameter, solid stainless steel rod with satin-finish. Post and Concealed Mounting
Threaded Flange are machined as one piece.
Hook Pin — 18-8 S, type-304, 6.4mm diameter (1/4"), solid stainless steel rod with satin-finish with thread to screw into Post.
Concealed Mounting Threaded Flange — 18-8 S, type-304, 5.6mm (7/32") thick, stainless steel plate with thread on outside
edge for fastening cover. 46mm (1-13/16") outside diameter with two holes for attachment to wall.
Threaded Flange Cover — 18-8 S, type-304, 1.4mm (17-gauge), machined stainless steel with satin-finish. 49mm (1-15/16")
diameter 13mm (1/2") deep. Cover fastens over mounting flange to conceal mounting screws.
INStaLLatIoN:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with par ticle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished)
can be secured.
S
Post
Flange Cover
13mm
1/2''
33mm
1-5/16''
SPECIFICatIoN:
Coat Hook shall be type-304 stainless steel with satin-finish. Coat Hook shall have 19mm (3/4") diameter Post with 6.4mm
(1/4") diameter Hook Pin. Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover. Threaded flange
cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal
mounting screws. Post and mounting flange are to be machined as one piece.
Coat Hook shall be Model B-542 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson,
Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...