PRODUCT SPECIFICATION
Surface-mounted spare toilet roll holder, Bobrick Cubicle Collection
Model B-541
Spare toilet roll holder shall be type-304 stainless steel with satin-finish. Toilet
roll holder shall have 0.9mm (20-gauge) wall thickness and 19mm (3/4")
outside diameter. Clearance between the toilet roll holder and wall shall be
55mm (2-1/8''). Concealed mounting flange shall be 5.6mm (7/32") thick
stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two
screw holes for attachment and thread on outside edge to fasten cover. Threaded
flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16")
diameter and shall fasten over mounting flange to conceal mounting screws. End
of toilet roll holder shall pass through flange and be welded to form one
structural unit. Shelf plate shall be 3mm (1/8") thick stainless steel plate, 49mm
(1-15/16") outside diameter and 19mm (3/4") inside diameter. Toilet roll holder
shall pass through shelf plate and be welded to form a
solid base.
Loading...