Bobrick B-52891 User Manual

BOBRICK

10-1/4"

260mm

Typ.

S

S
Viewing Slot

2-7/16"

60mm

Typ.

Pivot Point

Backplate

S

Mount within 12" (305mm)

of Front of Toilet Seat

(Optional)

C

12-9/16"

320mm

S

Finish Face of Wall

Door

Recommended Mounting Height Off Floor

For Universal / Barrier-Free Design

10-3/4"

275mm

3-1/2"

90mm

Typ.

7/8"

22mm

Typ.

5-1/4"

135mm

1" Typ.

25mm

S

S

S

31" 785mm

MatrixSeries™

Technical Data

Patented

JUMBO-ROLL

TOILET TISSUE DISPENSER

B-52891

MATERIAL:

Backplate — Durable, high-impact grey ABS. Equipped with a concealed locking device to secure door; keyed like other Bobrick
washroom accessories.

Door — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of door has same degree of arc as other
MatrixSeries washroom accessories. Radius on corners, edges and top complement other MatrixSeries washroom accessories.
Secured to backplate with two vandal-resistant screws at pivot point.

Spindles (2) — Removable outer spindle: durable, high-impact grey ABS; snaps into backplate. Fixed inner spindle: durable, high­impact grey ABS; molded as part of the backplate.

OPERATION:

Door unlocks with key provided and swings down for loading dispenser. Spindle accommodates one toilet tissue roll up to 10" (255mm)
diameter with 3" (75mm) diameter core, or remove the outer spindle (which is held in place with 3 snaps) from the inner spindle to
accommodate a 2-1/4" (55mm) diameter core roll. Slot in door indicates refill time. Unit is designed for quick reloading.

INSTALLATION:

Mount unit on wall or toilet partition with five sheet-metal screws (not furnished) at points indicated by an S. Rear edge of unit should
be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard toilet that projects 30" (760mm) from
back wall.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal
screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/4" (6mm) toggle
bolts or expansion bolts.

For partitions with par ticle-board or other solid core, secure with sheet-metal screws, or provide through-bolts, nuts, and washers. For
hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured.

SPECIFICATION:

Jumbo-roll toilet tissue dispenser shall be durable, high-impact grey ABS with high gloss finish on exposed surfaces. Front of door
shall have same degree of arc and match other Bobrick MatrixSeries™ accessories in the washroom. Radius of corners, edges, and top
of door shall complement other Bobrick MatrixSeries™ washroom accessories. Door shall be secured to backplate with two vandal­resistant screws at pivot points and a concealed locking device keyed like other Bobrick washroom accessories. Door shall have a slot
to reveal toilet tissue supply inside cabinet. Plastic spindle shall accommodate one toilet tissue roll up to 10" (255mm) diameter with
3" (75mm) diameter core. Spindle shall be convertible in the field to dispense a 2-1/4" (55mm) diameter core roll by removing outer
spindle furnished in-place. Manufacturer’s ser vice and parts manual shall be provided to the building owner/manager upon request.

Jumbo-Roll Toilet Tissue Dispenser shall be Model B-52891 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennesse; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.