Page 1
25mm
1"
S
585mm
23"
24" to 36" (610mm to 915mm)
Recommended Mounting Height Off Floor
240mm
15"
380mm
S
9-1/2"
S
BOBRICK
355mm
TYP.
14"
S
S
1/2"
13mm
SPRING CLIPS (4)
FINISH
FACE OF WALL
17"
S
16"
405mm
430mm
INTERIOR
2-1/2" TYP.
65mm
MatrixSeries™
Technical Data
Patented
SURFACE-MOUNTED
WASTE RECEPTACLE
B-5277
MATERIALS:
Durable, impact-resistant grey polymer with high gloss finish on exposed surfaces. Front of waste receptacle has same degree
of arc as other Bobrick MatrixSeries washroom accessories. Radius on edges and top of waste receptacle complement other
MatrixSeries accessories. Equipped with four mounting screw holes and four liner clips for securing optional vinyl liner.
Capacity: 13-gal. (49.2-L).
OPERATION:
Top edge has radius for safe handling. The space between bottom of waste receptacle and the floor when unit is properly
mounted facilitates floor cleaning. For Liner Clip Replacement Kit (set of 2 clips), order Bobrick Part No. 5277-13. Reusable
Heavy-Gauge Vinyl Liner is available as an optional accessory: order Bobrick Part No. 5277-12
INSTALLATION:
Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dr y wall
construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For
other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle
bolts or expansion bolts.
To Mount on Tile Wall: Clean tile wall surface. Use double-sided roll tape, 4" wide x 42-1/2" long x 1/8" thick (100 x 1080 x
3mm) (not furnished by manufacturer). Apply 2 strips of tape ver tically to back of receptacle, flush with bottom of receptacle.
Stick receptacle to wall and let it set for 24 hours before use.
SPECIFICATION:
Surface-mounted waste receptacle shall be durable, impact-resistant grey polymer with high-gloss finish on exposed surfaces.
Front of waste receptacle shall have same degree of arc as other Bobrick MatrixSeries™ accessories in the washroom. Radius
on edges and top of waste receptacle shall complement other Bobrick MatrixSeries™ washroom accessories. Top edge shall
have radius for safe handling. Waste receptacle shall be equipped with interior clips for securing optional vinyl liner and shall
have four mounting screw holes. Unit shall have a minimum capacity of 13-gal. (49.2-L). Manufacturer’s service and parts
manual shall be provided to the building owner/manager upon request.
Surface-Mounted Waste Receptacle shall be Model B-5277 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...