Bobrick B-5270 User Manual

BOBRICK

Recommended Mounting Height Off Floor

For Universal / Barrier-Free Design

25" to 30" (635mm to 760mm)

1-3/4"

45mm

S

3-13/16"

95mm

11-5/16"
285mm

Finish

Face of Wall

9-1/4"

235mm

4-3/16"
105mm

2-5/16" TYP.

60mm

1-5/8" TYP.

40mm

5-3/4"

145mm

S

S

S

Lid

Keyed Pivots (2)

KeyHole

Slot
Mounting
Holes (2)

Round Mounting

Holes (2)

9-15/16"
250mm

Finger Tip

Handles

MatrixSeries™

SuRFACE-MOuNTEd

Technical Data

MATERIALS:

Container — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of container has same degree of arc as
front of lid and other Bobrick MatrixSeries washroom accessories. Radius on corners and edges of container complement corners and
edges of lid and other MatrixSeries accessories. Capacity: 1.3-gal. (4.8-L).

Lid — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Fingertip handles for opening lid. Front of lid has
same degree of arc as front of container and other Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top of lid
complement corners and edges of container and other MatrixSeries accessories. Secured to container with keyed pivots.

SANITARy NAPkIN dISPOSAL

Patented

B-5270

OPERATION:

Lid flips up for disposal of sanitary napkins and for servicing container. Disposable paper liners for the container are available as an
optional accessory: order Bobrick Part No. 270-12 (case of 1000 paper liners).

INSTALLATION:

For permanent installation, use upper round mounting holes. Mount unit with two sheet metal screws, furnished by manufacturer, at
points indicated by an S.

For installation where the entire unit may be removed from wall for emptying and cleaning, use lower keyhole slot mounting holes.
Using the container as a template, mark the location of the keyhole slots indicated by an S. Mount plastic bushings with screws
furnished by manufacturer. Container then snaps over bushings to hold unit in place.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal
screws furnished by manufacturer.

For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws furnished by manufacturer, or provide
3/16" (4.8mm) toggle bolts or expansion bolts.

For partitions with par ticle board or other solid core, secure with two sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers.

For hollow-core metal partitions, provide solid backing into which sheet-metal screws (not furnished) can be secured. If two units are
installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

SPECIFICATION:

Surface-mounted sanitar y napkin disposal shall be durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front
of sanitary napkin disposal shall have same degree of arc and complement other MatrixSeries™ accessories in the washroom.
Radius on corners, edges and top of sanitar y napkin disposal shall complement other Bobrick MatrixSeries™ washroom accessories.
Container shall have a capacity of 1.3-gal. (4.8-L). Lid shall be secured to container with keyed pivots. Lid shall have fingertip handles.
Replacement part numbers shall be molded into unit. Manufacturer's service and parts manual shall be provided to the building
owner/manager upon request.

Surface-Mounted Sanitar y Napkin Disposal shall be Model B-5270 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.