Bobrick B-5221 User Manual

Technical Data

MatrixSeries™

SURFACE-MOUNTED

SEAT-COVER DISPENSER

B-5221

Finish Face

of Wall

2-7/16"

60mm

3-1/2"

90mm

Typ.

S

For Barrier-Free Design

45" to 59" (1145mm to 1500mm)

Recommended Mounting Height Off Floor

30" to 45" (760mm to 1145mm)

Recommended Mounting Height Off Floor

Patented

11-1/2"

290mm

3-1/16"

80mm

Typ.

16-1/8"

410mm

BOBRICK

S

MATERIALS:

Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of dispenser has same degree of arc as other
Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top complement other MatrixSeries accessories.

OPERATION:

Dispenser holds single- or half-fold paper toilet seat covers. Dispenser fills from bottom through concealed opening. Capacity:
250 toilet seat covers.

INSTALLATION:

Mount unit on wall or partition of toilet compar tment with two #8 x 1½'' (4.2 x 38mm) flat-head sheet-metal screws (not
furnished) at points indicated by an S. For plaster or dr y wall construction, provide concealed backing to comply with local
building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for
use with sheet-metal screws, or provide 1/8'' (3mm) toggle bolts or expansion bolts.

Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room
for filling dispenser from bottom.

SPECIFICATION:

Surface-mounted toilet-seat-cover dispenser shall be durable, high-impact grey ABS with high-gloss finish on exposed surfaces.
Front of dispenser shall have same degree of arc as other Bobrick MatrixSeries™ accessories in the washroom. Radius on
corners, edges and top of dispenser shall complement other Bobrick MatrixSeries™ washroom accessories. Unit shall have a
rectangular opening for dispensing toilet seat covers and a concealed opening in bottom for filling. Capacity shall be 250 paper
toilet seat covers.

Surface-Mounted Toilet-Seat-Cover Dispenser shall be Model B-5221 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.