Bobrick B-47069 User Manual

Technical Data

ConturaSeries

®

SURFACE-MOUNTED

NAPKIN/TAMPON VENDOR

B-47069

SERIES

Specify Model Required:

MATERIALS:

Cabinet — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construc tion.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and return

edges complement corners and edges on door.

Skirt — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Radius on corners complement corners and edges of flange and door.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Secured to cabinet with a concealed full-length stainless steel piano-hinge.

Equipped with two tumbler locks keyed like other Bobrick washroom accessories. Door has no brand-name advertising for products dispensed. Graphic
symbols identify products dispensed and coin denomination.

Coin Mechanisms (2) — Impact-Resistant PC-ABS Push Buttons. Accepts one or two quarters (U. S. or Canadian) as designated by factor y setting.
Coin mechanisms can be converted in the field from 25¢ to 50¢, or vice-versa. Coin Box is equipped with tumbler lock that opens with dif ferent key than
furnished for door locks.

Coin Return Push-Button (2) — Impact-Resistant PC-ABS Push-Button cancels selection and returns coin into product tray.
Product Tray — Impact-Resistant PC-ABS, provides convenient access to dispensed product.

 B-47069 25 Surface-Mounted 25¢ single-coin operation  B-47069 50 Surface-Mounted 50¢ double-coin operation

4-5/16''

110mm

4-7/16''

115mm

11''

280mm

28-1/2''

725mm

Patented

14-1/2''

370mm

S

5-7/8''

150mm

1-7/16''

35mm

Push-Button

2-1/4''

55mm

Finish Face of Wall

7-1/8''

180mm

5-3/4''

145mm

63'' 1600mm

For Barrier-Free Design

73'' to 77'' 1885 to 1955mm

Recommended Mounting Height Off Floor

Recommended Mounting Height Off Floor

5-3/16''

130mm

10-3/16''

260mm

Coin

Return

Lock

Lock & Key

Coin Slots

11-9/16''

295mm

S

OPERATION:

After coin is inserted in dispensing mechanism of patron's choice, pushing button dispenses boxed sanitar y napkin or tampon tube. Coin slot
of each dispensing mechanism is identified by a graphic symbol. Capacity: 20 sanitary napkins and 30 tampons. Coin slots are automatically
blocked with a red indicator when supply is depleted. Coin Return Push-Button cancels the selection and returns coin into product tray. Wrong
coins (penny, nickel, dime) by-pass mechanisms and drop into product tray. Vendor dispenses sanitar y napkin packages measuring 2-7/8" x
3/4" x 4-1/8" to 3-1/8" x 1-1/8" x 4-3/8" (73 x 19 x 105mm to 80 x 29 x 111mm) and tampon tubes measuring 4-5/8" long x 9/16" diameter
minimum to 5-1/8" long x 3/4" diameter maximum (118 x 14 to 130 x 19mm).

INSTALLATION:

Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dr y wall construction, provide
concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall constr uction,
provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts. If unit projects
above top of wainscot, provide aluminum channel or other filler to eliminate gap between unit and finish face of wall.

SPECIFICATION:

Surface-Mounted sanitar y napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitar y napkins or
tampons at user’s option. Dispensing mechanisms shall be pre-set at factory for ____________(insert one: Free, 25¢, or 50¢) operation, but shall
be convertible in the field to allow the change of coin denomination without removing unit from wall. Door shall be furnished with graphics
indicating specified coin denomination. Unit shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have #4 satin
finish. Stainless steel skirt shall have satin finish and have 90° retur n on edges; radius on corners complement corners and edges of flange and
door. Front of door shall have same degree of arc and match other Bobrick ConturaSeries
and edges of flange, skirt, and door shall complement other Bobrick ConturaSeries

®

accessories in the washroom. Radius on corners

®

washroom accessories. Flange shall be drawn, one-piece,
seamless construction. Door shall be drawn, 18-gauge (1.2mm), one-piece, seamless construction; secured to cabinet with a full-length stainless
steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two flush tumbler locks keyed like other Bobrick washroom
accessories. Push buttons shall be operable with one hand and with less than 5 pounds of force (22.2 N) without tight grasping, pinching, or
twisting of the wrist to comply with barrier-free accessibility guidelines (including ADA-ABA and ICC/ANSI in the U.S.A.). Push-Button coin
return shall cancel selection and return coin into product tray. Wrong coins (penny, nickel, dime) shall by-pass mechanisms and drop into
product tray. Product tray shall be impact-resistant PC-ABS plastic and provide easy access to dispensed product. Coin Box shall be equipped
with a tumbler lock that is keyed differently than door locks. Unit shall not car ry brand-name advertising.

Surface-Mounted Napkin/Tampon Vendor shall be Model __ __ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-47069-200 i8/25/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.