Bobrick B-4388 User Manual

ConturaSeries

®

Technical Data

Patented

RECESSED MULTI-ROLL

TOILET TISSUE DISPENSER

6-1/16''

S

S

155mm

7-9/16''

190mm

Finish Face of Wall

6''

150mm

Pivot Point

13/16''

21mm

2-3/4''

70mm

2-3/8''

60mm

Typ.

S

Lock & Key

Stainless

Steel Door

Toilet Tissue

Spindles (2)

Stainless

Steel

S

Flange

1-3/8''

25mm

Typ.

12-1/2''

320mm

S

1/8''

3mm

3-3/16''

80mm

B-4388

1-15/16''

50mm

Typ.

11-1/16''

280mm

S

Recommended Mounting Height Off Floor

Rough Wall Opening

6-1/4" (160mm) wide

11-1/4" (290mm) high

3-1/4" (83mm) minimum

710 to 915mm

28'' to 36''

recessed depth

710mm

28''

For Barrier-Free Design

Recommended Mounting Height Off Floor

MATERIALS:

Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and

return edges complement corners and edges of door.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin

finish. Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick ConturaSeries washroom
accessories. Radius on corners and edges of door complement other ConturaSeries accessories. Secured to cabinet with two rivets. Equipped
with a flush tumbler lock keyed like other Bobrick washroom accessories.

Dispensing Mechanism, Inner Housing, and Cam — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel.
Spindles (2) — Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked.

OPERATION:

Unit holds two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Tissue rolls are loaded and locked into dispensing
mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking door.

INSTALLATION:

Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of wall is 3-1/4"
(83mm). Allow clearance for construction features that may protr ude into opening from opposite wall. Coordinate with mechanical engineer to
avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure
unit with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished).

SPECIFICATION:

Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing mechanism,
inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one-piece, seamless
construction and shall have same degree of arc and match other Bobrick ConturaSeries

®

accessories in the washroom. Radius on corners
and edges of flange and door shall complement other Bobrick ConturaSeries® washroom accessories. Door shall be secured to cabinet
with two rivets and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories. Flange shall be drawn, one-piece,
seamless construction. Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Extra roll shall
automatically drop in place when bottom roll is depleted. Unit shall be equipped with two theft-resistant, heavy-duty, one-piece, molded ABS
spindles. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.

Recessed Multi-Roll Toilet Tissue Dispenser shall be Model B-4388 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.