15-1/4''
390mm
Recessed Cabinet
10-3/8''
265mm
15/16''
25mm
S
S
S
S
27-3/4''
705mm
S
S
S
S
1/4''
5mm
Typ.
10-3/8''
265mm
17-1/4''
440mm
1-15/16''
50mm
Removable
LinerMate
Bag Holder
20-7/8''
530mm
4-15/16''
125mm
1/8''
5mm
2-3/4''
70mm
2-9/16''
65mm
Typ.
S
14-3/4''
375mm
Typ.
25-7/8''
655mm
2-7/8''
70mm
Typ.
3-7/8''
100mm
Finish Face of Wall
Recommended Mounting Height Off Floor
For Universal / Barrier-Free Design
41'' to 45'' 1040 to 1145mm
Removable
Front Panel
S
S
S
ConturaSeries
®
Technical Data
Patented
RECESSED WASTE
RECEPTACLE
B-43644
Rough Wall Opening
15-7/8" (405mm) wide
26-1/4" (665mm) high
4" (100mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin-finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Radius
on corners and return edges complement side edges of waste receptacle.
Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Formed, one-piece, seamless
construction. Removable front panel has same degree of arc as other Bobrick ConturaSeries washroom accessories. Top edge
hemmed for safe handling. Radius on side edges of waste receptacle complement other ConturaSeries accessories. Secured to
cabinet with two keyholes over studs on bottom and two tamper-resistant setscrews on top. Capacity: 12.8-gal. (48.3-L).
LinerMate™ Bag Holder — Molded plastic bag holder sleeve and U-shaped 18-8 S, type-304, 20-gauge (0.91mm) stainless
steel support strap; riveted constr uction. Molded plastic bag holder has arc at front and same shape as inside of waste
receptacle area. Removable for servicing.
OPERATION:
To insert disposable plastic trash bag, lift LinerMate bag holder up and for ward and rest over edge of waste receptacle front
panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place plastic trash bag inside LinerMate
and fold plastic bag over LinerMate sleeve. Tie a knot in the corner of the bag, then place LinerMate with plastic trash bag
back into receptacle. To empty, gather disposable plastic trash bag from LinerMate bag holder sleeve and lift bag up. Front of
waste receptacle panel is removable for cleaning cabinet interior.
INSTALLATION:
Provide framed rough wall opening 15-7/8" wide x 26-1/4" high (405 x 665mm). Minimum recessed depth required to finish
face of wall is 4" (100mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with
shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) screws (not
furnished).
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/29/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
continued . . .
SPECIFICATION:
Recessed waste receptacle shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have satinfinish. Front of waste receptacle shall have same degree of arc and match other Bobrick ConturaSeries accessories in the
washroom. Radius on corners and edges of flange and waste receptacle shall complement other Bobrick ConturaSeries
washroom accessories. Flange shall be drawn, one-piece, seamless construction. Waste receptacle shall have a formed, onepiece, seamless, removable front panel with top edge hemmed. LinerMate bag holder shall have a molded plastic bag holder
sleeve with a 20-gauge (0.91mm) stainless steel, U-shaped support strap; riveted constr uction. Bag holder shall have an arc at
front and same shape as inside of waste receptacle area. Capacity of waste receptacle shall be 12.8-gal. (48.3-L).
Recessed Waste Receptacle shall be Model B-43644 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-43644 Rev. 4/29/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...