Bobrick B-4262 User Manual

Technical Data

ConturaSeries®

SURFACE-MOUNTED

PAPER TOWEL DISPENSER

B-4262

Finish Face of Wall

12-1/2''
320mm

4-7/8''

125mm

1/8''

3mm

75mm

S

205mm

S

3''

Typ.

8''

Typ.

13-1/4''
335mm

Recommended Mounting Height Off Floor

Patented

13-1/2''
345mm

TowelMate

Towel Guide

Bracket Return

1-5/8''
40mm

Typ.

10-13/16''

275mm

S

Lock & Key

Stainless

Steel Door

TowelMate
Towel Rod

MATERIALS:

Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish. Radius on corners
of cabinet match corners and edges of door and other Bobrick ConturaSeries washroom accessories. Back has recessed mounting slots to
prevent mounting screw heads from snagging towels. Rounded towel tray has hemmed opening to dispense paper towels without tearing.
Cabinet inside equipped with 90° return towel guide angle to prevent paper towels from falling for ward out when door is opened for ser vicing.
Furnished with internal TowelMate™ towel rod to dispense paper towels one at a time without bulging, sagging, bunching or falling thru
opening. Equipped with a semi-recessed tumbler lock keyed like other Bobrick washroom accessories. Capacity: 400 C-fold or 525 multifold
paper towels 2-1/2" to 3-13/16" (64–97mm) deep.

Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of door has
same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges match cor ners of cabinet and other
ConturaSeries accessories. Secured to cabinet with a full-length stainless steel piano-hinge.

TowelMate™ Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is field
replaceable. Stainless steel Stop Screws (2) lock TowelMate Rod assembly in place.

66'' to 70'' 1675 to 1780mm

OPERATION:

Unit dispenses C-fold or multifold paper towels 2-1/2" to 3-13/16" (64–97mm) deep without adjustment or use of adapters.
Load paper in towel tray, and then pull one sheet of paper towel over the TowelMate towel rod and out to conceal rod and star t
dispense. Slots in sides of cabinet indicate refill time. After unlocking with key provided, door swings down for loading paper
towels into cabinet.

INSTALLATION:

Mount unit on wall with four #10 x 1-1/4" (4.8 x 32mm) sheet-metal mounting screws (not furnished) at points indicated by
an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit
with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or
provide 1/8" (3mm) toggle bolts or expansion bolts.

SPECIFICATION:

Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded constr uction; exposed surfaces
shall have satin finish. Front of paper towel dispenser door shall have same degree of arc as other Bobrick ConturaSeries
accessories in the washroom. Radius on corners and edges of door and cabinet shall complement other Bobrick ConturaSeries
washroom accessories. Unit equipped with TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent
paper towels from falling forward out when door is opened for servicing and a Nylon Rod across the center of the towel tray to
dispense paper towels one at a time without bulging, sagging, bunching or falling thru the opening. Door shall be drawn, one­piece, seamless construction; secured to cabinet with a full-length stainless steel piano-hinge; and equipped with a tumbler lock
keyed like other Bobrick washroom accessories. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels
2-1/2" to 3-13/16" (64–97mm) deep without adjustment or use of adapters.

Surface-Mounted Paper Towel Dispenser shall be Model B-4262 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.