Bobrick B-4221 User Manual
Technical Data
11-1/4''
285mm
15-3/4''
400mm
3-9/16''
90mm
Typ.
S
Finish Face
of Wall
4-1/4''
110mm
Typ.
Recommended Mounting Height Off Floor
45'' to 59'' 1145 to 1500mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
30" to 45'' 760 to 1145mm
2-3/16''
55mm
S
ConturaSeries
®
SURFACE-MOUNTED
SEAT-COVER DISPENSER
B-4221
MATERIALS:
18-8 S, type-304, 20-gauge (1.0mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of dispenser
has same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges complement
other ConturaSeries accessories.
OPERATION:
Dispenser holds single- or half-fold paper toilet-seat covers. Dispenser fills from bottom through concealed opening. Capacity:
250 toilet seat covers.
INSTALLATION:
Mount unit on wall or partition of toilet compar tment with two screws (not furnished) at points indicated by an S. For plaster
or dry wall construction, provide concealed backing to comply with local building codes and secure with #8 x 1-1/2'' (4.2 x
38mm) sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws,
or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room
for filling dispenser from bottom.
SPECIFICATION:
Surface-mounted toilet-seat-cover dispenser shall be type-304, 20-gauge (0.9mm) stainless steel with drawn, one-piece, seamless construction; exposed sur faces shall have satin finish. Front of toilet-seat-cover dispenser shall have same degree of
arc and match other Bobrick ConturaSeries
dispenser shall complement other Bobrick ConturaSeries
dispensing toilet seat covers and a concealed opening in bottom for filling. Capacity shall be 250 paper toilet seat covers.
Surface-Mounted Seat-Cover Dispenser shall be Model B-4221 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
®
accessories in the washroom. Radius on corners and edges of toilet-seat-cover
®
washroom accessories. Unit shall have a rectangular opening for
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.
Loading...