Bobrick B-39747 User Manual

Technical Data

ClassicSeries

®

RECESSED CONVERTIBLE

AUTOMATIC UnIversAl rOll

PAPer TOWel DIsPenser

AnD WAsTe reCePTACle

17-3/16"

2-15/16"

75mm

Typ.

435mm

1"

25mm

SS

Typ.

Door

Lock

Finish Face of Wall

B-39747

S

3-15/16"

100mm

3"

75mm

5-1/8"

130mm

Patented

56"

1422mm

37-3/8"

950mm

S

15-3/16"

385mm

S

2-9/16"

65mm

Paper Towel

Lock & Key

Waste Receptacle

1" Dia.

25mm
Inlet for
Optional

Power Supply Cord

Automatic

Dispenser

Flange

23"

585mm

8-1/8"

206mm

2"

50mm

54-1/8"

1375mm

Recommended Mounting Height Off Floor for Barrier-Free Design

S

Rough Wall Opening

16" (405mm) wide

54-3/4" (1390mm) high

4" (102mm) minimum

recessed depth

59-1/2" 1505mm

MATERIALS:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin-finish. Equipped with a tumbler
lock keyed like other Bobrick washroom accessories.

Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction.
Door — 18-8 S, type-304, 20-gauge (0.9mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Secured to cabinet with

full-length, stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Automatic Roll Towel Dispenser — Durable, high-impact resin materials. Accepts universal standard-core, non-perforated rolls up to 8"

(205mm) wide, 8" (205mm) diameter. 800 ft (244 m) long. Dispenses one towel per dispense and can be set to dispense paper towels at three
different lengths. Accommodates up to 3-1/2" (90mm) diameter stub roll with automatic transfer to full roll.

Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Edges hemmed for safe handling. Secured to cabinet
with a tumbler lock keyed like other Bobrick washroom accessories. Equipped with interior hooks for optional vinyl liner. Capacity: 18-gal.
(68.0-L).

continued . . .

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/20/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.

OPERATION:

Electronic sensor automatically dispenses towel when hands are placed under the towel opening. Dispenses universal, 1-1/2" to 2" (38
to 51mm) diameter core, up tp 8" (205mm) diameter, 8" (205mm) wide, non-perforated, non-proprietary rolls. Towel length can be set
to 9" (230mm), 12" (305mm), 15" (380mm). Optional “Paper Saver” feature allows a shorter second sheet to dispense immediately
after the first sheet. The “Paper Saver” feature has two second sheet length options: 25% shorter sheet length or 12.5% shorter sheet
length. Dispense delay can be set to 1, 2 or 3 seconds. There is no delay when “Paper Saver” option is selected. LED light on dispenser
blinks when batteries need to be changed. The battery pack power source holds 4 “D” size alkaline batteries (not furnished). Dispenser
includes a 3-1/2" (90mm) diameter stub roll feature. When the stub roll is depleted, main roll automatically starts dispensing without
the need to open the dispenser.

To empty waste receptacle, unlock with key provided.

NOTE: LinerMate™ sold as an optional accessory to accommodate disposable trash liners. LinerMate eliminates unsightly trash liner
overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste receptacle.

Options:

• Folded Towel Dispenser Module convertible in field: order Bobrick Part No. 3944-52.

• Mechanical (Non-Automatic) Universal Touch-Free Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3961-50.

• 12-gallon Waste Receptacle: order Bobrick Part No. 367-60.

• Reusable Vinyl Liner: order Bobrick Part No. 368-16.

• LinerMate™ for 12-gal waste only: order Bobrick Part No. 3944-134.

POWER REQUIREMENTS:

Dispenser is powered by 4 “D” size alkaline batteries (not furnished) or a 6 volt DC power supply. Power supply is an optional
accessory: order Bobrick AC Adapter Kit Part No. 3974-57.

INSTALLATION:

Provide framed rough wall opening 16" wide x 54-3/4" high (405 x 1390mm). Minimum recessed depth required to finish face of wall
is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate
with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide channel or other filler to
eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points
indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).

Open battery cover at the front of the dispenser and install 4 “D” size alkaline batteries. Select sheet length, delay of “Paper Saver”
mode using the switches to the right of the batteries. Load paper towel using the instructions on the dispenser.

Electrical supply for use with 6 volt DC power supply must be installed per applicable building codes.

SPECIFICATION:

Recessed convertible automatic universal roll paper towel dispenser and waste receptacle shall be type-304 stainless steel with all­welded construction; exposed sur faces shall have satin-finish. Flange shall be drawn and beveled, one-piece, seamless construction.
Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a concealed tumbler lock keyed like
other Bobrick washroom accessories. No-touch dispenser dispenses universal, 1-1/2" to 2" (38 to 51mm) diameter core, up tp 8"
(205mm) diameter, 8" (205mm) wide, non-perforated, non-proprietary rolls. 800 ft (244 m) long. Dispenser automatically dispenses
towel when hands are placed under the towel opening. Dispenser can be powered by 4 “D” size alkaline batteries or an optional 6
volt DC power supply. Equipped with switches that allow paper length to be set at 9" (230mm), 12" (305mm) or 15" (380mm), delay
that can be set at 1, 2 or 3 seconds, and “Paper Saver” feature that provides a shorter second sheet with options of 25% shorter and

12.5% shorter. Blinking LED indicates if batteries need to be replaced. Automatic transfer shall dispense stub roll up to 3-1/2" (90mm)
diameter before new main roll is automatically dispensed. Removable waste receptacle shall be secured to cabinet with a tumbler lock,
edges hemmed for safe handling, and shall have a minimum capacity of 18-gal. (68.0-L).

Recessed Convertible Automatic Universal Roll Paper Towel Dispenser And Waste Receptacle shall be Model B-39747
of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-39747 Rev. 4/20/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.