Bobrick B-3961 User Manual
Technical Data
ClassicSeries
®
RECESSED CONVERTIBLE
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-3961
Patented
2-15/16
75mm
Typ.
''
56
1422mm
12-11/16
322mm
17-3/16
''
''
437mm
S
S
15-5/16
389mm
Finish Face of Floor
''
''
S
S
''
1
25mm
Typ.
Door
Lock
Paper
Towel
Dispenser
Lock & Key
Flange
Waste
Receptacle
Finish Face of Wall
5-1/8
130mm
''
48
1220mm
Maximum
Mounting
Height
(Refer to ADA H/C)
23
584mm
4-1/8
105mm
''
S
S
3-15/16
100mm
''
2-15-16
75mm
''
54-1/8
1375mm
Rough Wall Opening
15-7/8" (403mm) wide
54-5/8" (1387mm) high
4" (100mm) minimum
recessed depth
1505mm
''
59-1/2
Recommended Mounting Height Off Floor For Barrier-Free Design
''
''
''
MATERIALS:
Cabinet — 18-8 S, type 304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin-finish. Equipped
with a tumbler lock keyed like other Bobrick washroom accessories.
Flange — 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless
construction.
Door — 18-8 S, type 304, 20-gauge (0.9mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Secured
to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom
accessories.
Touch-free Roll Towel Dispenser — Durable, high-impact resin materials. Accepts standard-core rolls up to 8" (205mm)
wide, 8" (205mm) diameter. 800 ft (244mm) long. Dispenses one 12" (300mm) length of towel per pull. Accommodates up to
3-1/2" (90mm) diameter stub roll with automatic transfer to full roll.
Waste Receptacle — 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin finish. Front and sides of bottom and all top
edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories.
Equipped with interior hooks for optional vinyl liner. Capacity: 12-gal. (45.5-L).
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/29/10
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
S/B
Printed in U.S.A.
OPERATION:
Touch-Free roll towel dispensing mechanism one 12" (300mm) length of paper towel per pull and operates smoothly and
quietly. User only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for user to
advance paper should it become necessary to feed paper through dispenser. Automatic transfer dispenses stub roll before new
roll is dispensed. When stub roll is depleted, advancement of paper towel feed wheel allows the main roll to start dispensing
without the need to open the dispenser. Dispenser accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non perforated
paper towel rolls and dispenses with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines
(including ADAAG in U.S.A.).
To empty waste receptacle, unlock with key provided.
NOTE: To accommodate disposable trash liners, order LinerMate™, sold as an optional accessory item. LinerMate eliminates
unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste
receptacle.
Options:
• Folded Towel Dispenser Module convertible in field: order Bobrick Part No. 3944-52.
• Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-50.
• 18-gallon Waste Receptacle: order Bobrick Par t No. 368-60.
• Reusable Vinyl Liner: order Bobrick Part No. 368-16.
• LinerMate™ for 12-gal waste only: order Bobrick Part No. 3944-134.
INSTALLATION:
Provide framed rough wall opening 15-7/8" wide x 54-5/8" high (403 x 1387mm). Minimum recessed depth required to
finish face of wall is 4" (100mm). Allow clearance for construction features that may protrude into opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims
between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm ) sheet-metal screws
(not furnished).
SPECIFICATION:
Recessed convertible touch-free roll towel dispenser and waste receptacle shall be type 304 stainless steel with all-welded
construction; exposed sur faces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction.
Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler lock keyed like
other Bobrick washroom accessories. Towel mechanism accommodates up to 8" (205mm) wide, 8" (205mm) diameter, nonperforated paper towel rolls. 800 ft (244mm) long. Touch-Free pull towel mechanism dispenses one 12" (300mm) length of
towel per pull. User only touches the paper. Automatic transfer shall dispense stub roll up to 3-1/2" (90mm) diameter before
new roll is dispensed. Equipped with paper towel feed wheel for use in filling the dispenser, or for user to advance paper should
it become necessary to feed paper through dispenser. Paper towels are dispensed with pull force of less than 5 pounds (22.2 N)
to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Removable waste receptacle shall be secured
to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed for safe handling, and shall have
a minimum capacity of 12-gal. (45.5-L).
Recessed Convertible Paper Towel Dispenser and Waste Receptacle shall be Model B-3961 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-3961 Rev. 4/29/10
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
S/B
Printed in U.S.A.
Loading...