Bobrick B-3944 User Manual

Technical Data

ClassicSeries

®

RECESSED CONVERTIBLE

PAPER TOWEL DISPENSER

AND WASTE RECEPTACLE

Finish Face of Wall

17-3/16''

56''

1422mm

437mm

S S

18-1/8''
460mm

S

1''

25mm

Typ.

1''

25mm

Typ.

Door

Paper Towel

S

Dispenser

Locks & Key

Removable

Waste

Receptacle

48''

1220mm

Maximum

Mounting

Height

(Refer to ADA H/C)

23''

584mm

4''

100mm

3/16''
5mm

B-3944

S

S

54-3/32''
1373mm

66'' to 73'' 1675 to 1855mm

Recommended Mounting Height Off Floor

Recommended Mounting Height Off Floor

59-1/2'' 1510mm

For Barrier-Free Design

Patent Pending

12''

320mm

S S

15-3/16''

386mm

Finish Face of Floor

1-15/16''

49mm

4-1/8''

105mm

S

2-15/16''

75mm

Rough Wall Opening

16" (406mm) wide

54-3/4" (1390mm) high

4" (100mm) minimum

recessed depth

MATERIALS:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin-finish.

Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless con-

struction.

Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Double-pan-back construction. Secured to cabinet
with a full-length stainless steel piano-hinge. Equipped with a semi-concealed tumbler lock keyed like other Bobrick washroom
accessories.

Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Rounded towel tray has
hemmed opening to dispense paper towels without tearing. Capacity: 600 C-fold or 800 multifold paper towels.

Optional: Order Bobrick Model No. 3944-130 TowelMate™ available as on optional accessory. TowelMate accessory allows
for paper towels to dispnse one at a time without bulging or sagging, or falling through the towel tray opening. The 90 degree
return on the towel guide prevents papers from falling forward and out when door is opened for ser vicing. TowelMate fits
Gamco and most other manufacturers'.

continued . . .

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/27/10
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.

R/A S/C

Printed in U.S.A.

Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Front and sides of bottom and all top
edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories.
Equipped with interior hooks for optional vinyl liner. Capacity: 12-gal. (45.5-L).

OPERATION:

Paper towel dispenser accommodates C-fold or multifold paper towels without adjustment or use of adapters. To adapt to
changing needs of washrooms, this unit is field convertible with the Universal, Touch-Free Roll Towel Dispenser or Universal,
Automatic Roll Towel Dispenser. To order convertible modules, reference part numbers below under Options.

To empty waste receptacle, unlock with key provided.

NOTE: To accommodate disposable trash liners, order LinerMate™, sold as an optional accessory item. LinerMate eliminates
unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste
receptacle.

Options:

• Universal Touch-Free Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3961-50.

• Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-50.

• 18-gallon Waste Receptacle: order Bobrick Par t No. 368-60.

• Reusable Vinyl Liner: order Bobrick Part No. 368-16.

• LinerMate™ for 12-gal waste only: order Bobrick Part No. 3944-134.

INSTALLATION:

Provide framed rough wall opening 16" wide x 54-3/4" high (406 x 1390mm). Minimum recessed depth required to finish face
of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between
framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not
furnished).

SPECIFICATION:

Recessed convertible paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction;
exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless constr uction. Door shall be
secured to cabinet with a full-length stainless steel piano-hinge and equipped with a semi-concealed tumbler lock keyed like
other Bobrick washroom accessories. Paper towel dispenser shall dispense 600 C-fold or 800 multifold paper towels. Removable
waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed
for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L).

Recessed Convertible Paper Towel Dispenser And Waste Receptacle shall be Model B-3944 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/27/10 S/B Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.