Technical Data
Finish Face of Wall
9/16''
14mm
Recommended Mounting Height Off Floor
66'' to 73'' 1675 to 1855mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
59-1/2'' 1510mm
54-1/16''
1375mm
7-5/8''
195mm
17-3/16''
435mm
S
S
56''
1420mm
35-5/16''
895mm
15-5/16''
390mm
S
S
15/16''
24mm
Typ.
Lock & Key
Paper Towel
Dispenser
Lock
Removable
Waste
Receptacle
Door
20-11/16''
525mm
Finish Face of Floor
48''
1220mm
Maximum
Mounting
Height
(Refer to ADA H/C)
12-11/16''
320mm
TrimLineSeries™
RECESSEd
PAPER TOwEL dISPENSER
ANd wASTE RECEPTACLE
B-39003
Rough Wall Opening
16" (405mm) wide
54-5/8" (1387mm) high
7-7/8" (200mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin finish.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16'' (14mm) 90° return edges for maximum rigidity.
Secured to cabinet with a concealed, full-length, stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick
washroom accessories.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Rounded towel tray has hemmed
opening to dispense paper towels without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
Waste Container — Removable, leakproof, rigid molded plastic. Capacity: 12-gal. (45.4-L).
OPERATION:
Paper towel dispenser adjusts to accommodate C-fold, multifold, or singlefold paper towels by repositioning built-in adapter tabs in one
of six slots. No additional towel trays or adapters required. Waste receptacle is serviced by opening door and removing waste container.
INSTALLATION:
Provide framed rough wall opening 16'' wide x 54-3/4'' high (405 x 1390mm). Minimum depth required from finish face of wall is 7-7/8''
(200mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler
to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points
indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed sur faces
shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed,
full-length, stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Paper
towel dispenser shall be equipped with a six-position adapter that is adjustable to dispense 600 C-fold, 800 multifold, or 1100 singlefold
paper towels. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a minimum
capacity of 12-gal. (45.4-L). Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-39003 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; Bobrick Washroom Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 2/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...