12-1/2''
320mm
7-9/16''
190mm
6-1/16''
155mm
1-3/8''
35mm
Typ.
S
S
Lock & Key
Stainless
Steel Door
Stainless
Steel Flange
Toilet Tissue
Spindles (2)
S
S
Finish Face of Wall
2-3/4''
70mm
1-15/16''
50mm
Typ.
6''
150mm
Pivot Point
13/16''
20mm
1/8''
3mm
3-3/16''
80mm
2-3/8''
60mm
S
S
11-1/16''
280mm
Recommended Mounting Height Off Floor
28'' to 36''
710 to 915mm
Recommended Mounting Height Off Floor
for Barrier-Free Design
28''
710mm
REcESSEd
Technical Data
MuLTI-ROLL TOILET
TISSuE dISpEnSER
B-3888
Rough Wall Opening
6-1/4" (160mm) wide
11-1/4" (290mm) high
3-1/4" (83mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have
satin finish. Front of door is drawn, one-piece, seamless construction. Secured to cabinet with two rivets. Equipped with a tumbler lock
keyed like other Bobrick washroom accessories.
Dispensing Mechanism, Inner Housing and Cam — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel.
Spindles (2) — Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked.
OpERATIOn:
Unit holds two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Tissue rolls are loaded and locked into
dispensing mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after
unlocking door.
InSTALLATIOn:
Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of
wall is 3-1/4" (83mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. Mount unit with shims between framing and cabinet at all points indicated by
an S, then secure unit with sheet-metal screws (not furnished).
SpEcIfIcATIOn:
Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing
mechanism, inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn,
one-piece, seamless construction. Door shall be secured to cabinet with two rivets and equipped with a tumbler lock keyed like other
Bobrick washroom accessories. Flange shall be drawn, one-piece, seamless construction. Unit shall dispense two standard-core toilet
tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Extra roll shall automatically drop in place when bottom roll is depleted. Unit
shall be equipped with two theft-resistant, heavy-duty, one-piece, molded ABS spindles. Manufacturer’s service and parts manual shall
be provided to the building owner/manager upon request.
Recessed Multi-Roll Toilet Tissue Dispenser shall be Model B-3888 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...