Technical Data
TrimLineSeries™
SuRfAcE-MOuNTEd
PAPER TOwEL dISPENSER
ANd wASTE REcEPTAcLE
B-380349
Finish Face of Wall
13''
330mm
55-1/8''
1400mm
34-1/4''
870mm
12-11/16''
322mm
MATERIALS:
Cabinet & Flange — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
Skirt — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin-finish. 9/16" (14mm) 90° return for maximum rigidity. Secured
to cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two
tumbler locks keyed like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Rounded towel tray has hemmed opening to dispense
paper towels without tearing. Capacity: 600 C-fold or 800 multifold paper towels.
Waste Container — Removable, leak-proof, rigid molded plastic. Capacity: 3.8-gal. (14.4-L).
OPERATION:
Paper towel dispenser is adjustable to accommodate C-fold and multifold paper towels. To service waste receptacle, unlock door with
key provided and remove waste container. Cable door-swing limiter prevents damage to washroom accessories and walls.
INSTALLATION:
Mount unit on wall with six #8 x 1-1/4'' (4.2 x 32mm ) sheet-metal screws (not furnished) at points indicated by an S. For plaster or
dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For
other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or
expansion bolts. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between cabinet and
finish face of wall.
SPEcIfIcATION:
Surface-mounted paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return; be secured to cabinet with a
concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two tumbler locks
keyed like other Bobrick washroom accessories. Paper towel dispenser shall be capable of dispensing 600 C-fold or 800 multifold paper
towels. Waste receptacle shall be furnished with a removable, leak-proof, rigid molded plastic waste-container with a capacity of 3.8-gal.
(14.4-L). Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Finish Face of Floor
Lock & Key
Paper Towel
Dispenser
Door
Lock
Removable
Waste
Receptacle
(Refer to ADA H/C)
48''
1220mm
Maximum
Mounting
Height
9/16''
14mm
4-1/16''
103mm
S
S
S
1702 to 1880mm
67'' to 74''
Recommended Mounting Height Off Floor
1520mm
59-3/4''
For Barrier-Free Design
Recommended Mounting Height Off Floor
Surface-Mounted Paper Towel Dispenser And Waste Receptacle shall be Model B-380349 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...