Technical Data
Finish Face of Wall
53-3/16''
1350mm
S
3-5/8''
92mm
S
9/16''
14mm
2''
50mm
Recommended Mounting Height Off Floor
69'' to 76'' 1755 to 1930mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
59-3/4'' 1520mm
11-1/16''
280mm
S S
55-1/8''
1400mm
34-1/4''
870mm
13''
330mm
S
S
Lock & Key
Door
Lock
Removable
Waste
Receptacle
Paper Towel
Dispenser
48''
1220mm
Maximum
Mounting
Height
(Refer to ADA H/C)
12-11/16''
322mm
Finish Face of Floor
TrimLineSeries™
SEMI-RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-38032
Rough Wall Opening
11-1/2'' (292mm) wide
53-5/8'' (1362mm) high
3-3/4'' (95mm) minimum
MATERIALS:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin-finish. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet
with a concealed, full-length, stainless steel piano-hinge. Equipped with stainless steel cable door-swing limiter and two tumbler locks keyed like
other Bobrick washroom accessories.
Skirt — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stain less steel with satin finish. Rounded towel tray has hemmed opening to
dispense paper towel without tearing. Capacity: 600 C-fold, 800 multifo ld, or 1100 singlefold paper towels.
Waste Container — Leakproof, rigid molded plastic. Removable for servicing. Capacity: 6.3-gal. (24-L).
OPERATION:
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel
trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents
recessed depth
damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2" wide x 53-5/8" high (292 x 1362mm). Minimum recessed depth required from finish face of
wall is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. If unit
projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount
cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheetmetal screws (not furnished).
SPECIFICATION:
Semi-recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel; all-welded construction. Exposed surfaces
shall have satin finish. Door with 9/16" (14mm) 90° return shall be secured to cabinet with a concealed, full-length, stainless steel
piano-hinge and equipped with a stainless steel cable door-swing limiter and two tumbler locks. Paper towel dispenser shall be capable
of dispensing 600 C-fold, 800 multifold, or 1100 singlefold paper towels. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a capacity of 6.3-gal. (24-L). Manufacturer’s service and parts manual shall be provided
to the building owner/manager upon request.
Semi-Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-38032 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...