Technical Data
TrimLineSeries
™
RECESSED
NAPKIN/TAMPON VENDOR
B-37063
SERIES
Specify Model Required:
75mm
28''
710mm
Patented
MATERIALS:
Cabinet — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construc tion.
B-37063 25 Recessed 25¢ single-coin operation B-37063 50 Recessed 50¢ double-coin operation
13-7/8''
S
S
11-7/8''
300mm
355mm
8''
205mm
205mm
S
Lock & Key
Coin Slots
Coin
Return
Lock
S
8''
3''
Finish Face of Wall
Push-Button
11-1/4''
285mm
1-7/16''
35mm
2-3/8''
60mm
1''
25mm
5-9/16''
140mm
7-15/16''
200mm
2-7/8''
75mm
S
25-7/8''
700mm
Recommended Mounting Height Off Floor
S
62'' 1575mm
For Barrier-Free Design
73'' to 77'' 1855 to 1955mm
Rough Wall Opening
Recommended Mounting Height Off Floor
12-1/2" (320mm) wide
26-3/8" (670mm) high
5-9/16"
(140mm) minimum
recessed depth
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Door has flat design with 90° return edges; conceals flange.
Secured to cabinet with a concealed full-length stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick
washroom accessories. Door has no brand-name advertising for products dispensed. Graphic symbols identify products dispensed and coin
denomination.
Coin Mechanisms (2) — Impact-Resistant PC-ABS Push Buttons. Accepts one or two quarters (U. S. or Canadian) as designated by factor y
setting. Coin mechanisms can be converted in the field from 25¢ to 50¢, or vice-versa. Coin Box is equipped with tumbler lock that opens with
different key than fur nished for door locks.
Coin Return Push-Button (2) — Impact-Resistant PC-ABS Push-Button cancels selection and returns coin into product tray.
Product Tray — Impact-Resistant PC-ABS, provides convenient access to dispensed product.
OPERATION:
After coin is inserted in dispensing mechanism of patron's choice, pushing button dispenses boxed sanitar y napkin or tampon tube. Coin slot
of each dispensing mechanism is identified by a graphic symbol. Capacity: 20 sanitary napkins and 30 tampons. Coin slots are automatically
blocked with a red indicator when supply is depleted. Coin Return Push-Button cancels the selection and returns coin into product tray. Wrong
coins (penny, nickel, dime) by-pass mechanisms and drop into product tray. Vendor dispenses sanitar y napkin packages measuring 2-7/8" x
3/4" x 4-1/8" to 3-1/8" x 1-1/8" x 4-3/8" (73 x 19 x 105mm to 80 x 29 x 111mm) and tampon tubes measuring 4-5/8" long x 9/16" diameter
minimum to 5-1/8" long x 3/4" diameter maximum (118 x 14 to 130 x 19mm).
INSTALLATION:
Provide framed rough wall opening 12-1/2" wide x 26-3/8" high (320 x 670mm). Minimum recessed depth required to finish face of wall for
fully recessing the unit is 5-9/16" (140mm). Allow clearance for construction features that may protrude into opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or
other filler to eliminate gap between flange and finish face of wall. Insert cabinet to wall depth available, then secure unit with four sheet-metal
screws, not furnished by manufacturer, at points indicated by a S.
SPECIFICATION:
Recessed napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary napkins and tampons at user’s
option. Dispensing mechanisms shall be pre-set at factory for__ __ (insert one: 25¢ or 50¢) operation, but shall be convertible in
the field to allow the change of coin denomination removing unit from wall. Door shall be furnished with graphics indicating specified coin
denomination. Unit shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have #4 satin finish. Door shall be
18 gauge (1.2mm); have flat door design with 90° return edges; conceals flange; be secured to cabinet with a concealed, full-length stainless
steel piano hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Push buttons shall be operable with
one hand and with less than 5 pounds of force (22.2 N) without tight grasping, pinching, or twisting of the wrist to comply with barrier-free
accessibility guidelines (including ADA-ABA and ICC/ANSI in the U.S.A.). Push-Button coin return shall cancel selection and return coin into
product tray. Wrong coins (penny, nickel, dime) shall by-pass mechanisms and drop into product tray. Product tray shall be impact-resistant PCABS plastic and provide easy access to dispensed product. Coin Box shall be equipped with a tumbler lock that is keyed differently than door
locks. Unit shall not carr y brand-name advertising.
Recessed Napkin/Tampon Vendor shall be Model __ __ (insert model number) of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-37063-200 r8/30/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
Loading...