Bobrick B-3699 User Manual

Technical Data
ClassicSeries™
SURFACE-MOUNTED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
Finish Face of Wall
B-3699
4-1/4"
110mm
Skirt
S
26-1/8'' 665mm
S
71'' 1805mm
for Barrier-Free Design
Recommended Mounting Height Off Floor
Recommended Mounting Height Off Floor
28''
710mm
30-7/8'' 784mm
9-1/16'' 230mm
10''
255mm
2-5/8''
65mm
Typ.
S
S
Finish Face of Floor
14-1/4'' 360mm
Door
S
Paper Towel
Dispenser
Removable
Waste
Receptacle
S
4-1/84'' 105mm
Typ.
1220mm
Mounting Height
(Refer to ADA H/C)
48''
Max
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin-finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction.
Skirt — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Secured to cabinet with a full-length, stainless steel piano-hinge.
Equipped with a knob latch.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Capacity: 350 C-fold or 475 multifold paper towels.
Waste Receptacle — 18-8 S, type-304, Heavy-gauge stainless steel with satin-finish. Top edges are hemmed for safe handling. Friction catch. Capacity: 2-gal. (7.6-L).
OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment. Rounded towel tray has hemmed opening to dispense paper towels without tearing. Waste receptacle is retained in cabinet by a friction catch and is removable for servicing.
INSTALLATION:
Mount unit on wall with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between unit and finish face of wall.
SPECIFICATION:
Surface-mounted paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded constr uction; exposed surfaces shall have satin-finish. Flange shall be drawn, one-piece, seamless construction. Door shall be secured to cabinet with a full-length, stainless steel piano-hinge, and equipped with a knob latch. Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels without adjust­ment or use of adapters. Removable stainless steel waste receptacle shall be retained in cabinet by a friction catch, have top edges hemmed for safe handling; and shall have a minimum capacity of 2-gal. (7.6-L). Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Paper Towel Dispenser And Waste Receptacle shall be Model B-3699 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
51-1/2'' 1310mm
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 2/09 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...