Technical Data
TrimLineSeries™
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-36903
Door
Paper Towel
Dispenser
Mounting Height
(Refer to ADA H/C)
Removable
Waste
Receptacle
Finish Face of Wall
9/16''
14mm
48''
1220mm
Max
50mm
S
29-1/8''
740mm
68'' 1725mm
Recommended Mounting Height Off Floor
2''
S
3-5/8''
90mm
Rough Wall Opening
11-1/2'' (290mm) wide
29-1/2'' (750mm) high
3-3/4'' (95mm) minimum
recessed depth
50'' 1270mm
For Barrier-Free Design
Recommended Mounting Height Off Floor
13''
330mm
31-1/8''
790mm
19-7/8''
505mm
20''
510mm
S
S
11-1/6''
280mm
Finish Face of Floor
S
S
MATERIALS:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construc tion.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construc tion.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. 9/16" (14mm) 90° return edges for maximum rigidity. Secured to cabinet with a
concealed, full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and friction catch.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Capacity: 300 C-fold or 400 multifold paper towels.
Waste Container — Removable, leakproof, rigid molded plastic. Capacity: 1.6-gal. (6.1-L).
OPERATION:
Paper towel dispenser accommodates C-fold and multifold paper towels without adjustment or use of adapters. Waste receptacle is serviced by
opening door and removing waste container. Door conceals flange from view. Cable door-swing limiter prevents damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2" wide x 29-1/2" high (290 x 750mm). Minimum recessed depth required from finish face of wall
is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate
gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit
with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction. Exposed sur faces shall have
satin finish. Flange shall be drawn, one-piece, seamless construction. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges;
be secured to cabinet with a concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and
friction catch. Door conceals flange from view. Paper towel dispenser shall be capable of dispensing 300 C-fold or 400 multifold paper towels
without adjustment or use of adapters. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container
with a capacity of 1.6-gal. (6.1-L). Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-36903 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 2/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...