Technical Data
ClassicSeries™
RECESSED
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-369
Finish Face of Wall
1''
25mm
Typ.
Door
Knob Latch
Paper Towel
Dispenser
Waste
48''
1220mm
Max
Mounting Height
(Refer to ADA H/C)
3/16''
5mm
S
26-1/8''
665mm
S
2-3/8''
60mm
Typ.
3-15/16"
100mm
70'' 1780mm
Recommended Mounting Height Off Floor
Rough Wall Opening
12-5/8" (320mm) wide
26-5/8" (675mm) high
4" (102mm) minimum
50-1/2'' 1285mm
for Barrier-Free Design
Recommended Mounting Height Off Floor
recessed depth
MATERIALS:
28''
710mm
31-1/32''
788mm
1''
25mm
Typ.
S
9-1/16''
230mm
10''
255mm
S
Finish Face of Floor
14''
355mm
12-3/16''
310mm
S
Removable
Receptacle
S
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge.
Equipped with a knob latch.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Capacity: 350 C-fold or 475 multifold paper
towels.
Waste Receptacle — 18-8 S, type-304, Heavy-gauge stainless steel with satin finish. Top edges are hemmed for safe handling. Friction catch.
Capacity: 2-gal. (7.6-L).
OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment. Rounded towel tray has hemmed opening to dispense
paper towels without tearing. Waste receptacle is retained in cabinet by a friction catch and is removable for servicing.
INSTALLATION:
Provide framed rough wall opening 12-5/8" wide x 26-5/8" high (320 x 675mm). Minimum recessed depth required to finish face of wall is 4"
(102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical
engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap
between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then
secure unit with sheet-metal screws furnished by manufacturer.
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have
satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be secured to cabinet with a full-length stainless
steel piano-hinge and equipped with a knob latch. Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels without adjustment or use of adapters. Removable stainless steel waste receptacle shall be retained in cabinet by a friction catch, have top edges hemmed for
safe handling, and shall have a minimum capacity of 2-gal. (7.6-L). Manufacturer's service and parts manual shall be provided to the building
owner/manager upon request.
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-369 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 2/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.
Loading...