Bobrick B-3579 User Manual

Technical Data

17-3/16''

445mm

30-7/8''

785mm

S

S

15-3/16''

385mm

12-5/16''

285mm

1-1/8''

30mm

Typ.

4-7/8''

100mm

S

S

Toilet-Seat-Cover

Dispenser

Toilet Tissue

Dispenser (2)

Recommended Cutout Height Off Floor

60''

1525mm

4-3/16''

105mm

Sanitary Napkin

Disposal Panel

Removable

Waste

Receptacle

Lock &

Key

Finish Face of Wall

Door

Lock

Cabinet

S

S

Centerline of Toilet Tissue

Dispenser shall be 7'' to 9'' (180 to 230mm)

in Front of Toilet

C

L

ClassicSeries™

SuRfACE-MOuNTEd

SEAT-COvER dISPENSER,

SANITARy NAPkIN dISPOSAL,

ANd TOILET TISSuE dISPENSER

B-3579

MATERIALS:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construc tion.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless construction. Secured to cabinet with

a full-length stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom accessories.
Toilet Tissue Dispensers (2) — .100" (2.5mm) thick ABS. 18-8 S, type-304, 26-gauge (0.5mm) stainless steel waste deflector at-

tached to the top toilet tissue dispenser only. Equipped with two theft-resistant, heavy-duty, one-piece, molded polyethylene spindles.
Disposal Panel — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin finish. Secured

to cabinet with a spring-loaded, full-length stainless steel piano-hinge. Equipped with an international graphic symbol identifying
napkin disposal.

Waste Receptacle — Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.8-gal. (3.0-L).

OPERATION:

Toilet-seat-cover dispenser holds 1000 single- or half-fold paper covers. Door unlocks with key provided and swings open for filling.
Spindles may be removed from cabinet only when door is open. Receptacle is removable for servicing. Unit holds two standard-core
toilet tissue rolls up to 5-1/4'' (135mm) diameter (1800 sheets).

Designer's Note: Disposable liners are available as an accessory for sanitary napkin disposal: order Bobrick Part No. 353-12.

INSTALLATION:

continued . . .

Mount unit on wall with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or
dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For
other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or
expansion bolts.Specification:

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 1/08* R/A, S/D Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.

SPECIfICATION:

Surface-mounted toilet-seat-cover dispenser, sanitary napkin disposal, and toilet tissue dispenser shall be type-304 stainless steel with
all-welded construction; exposed sur faces shall have satin finish. Toilet tissue dispensers shall be ABS plastic with a type-304 stainless
steel waste deflector attached to the top tissue dispenser. Flange shall be drawn and beveled, one-piece, seamless construction. Unit
shall be mounted on side wall of single toilet compartment. Door shall be one-piece, seamless constr uction; secured to cabinet with a
full-length stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Toilet­seat-cover dispenser shall hold 1000 paper covers. Self-closing disposal panel shall be secured to cabinet with a spring-loaded, full­length stainless steel piano-hinge has hemmed edges and equipped with an international graphic symbol identifying napkin disposal.
Sanitary napkin disposal shall be furnished with a removable, leak-proof, molded polyethylene receptacle with a capacity of 0.8-gal.
(3.0-L). Unit shall be equipped with two theft-resistant, heavy-duty polyethylene toilet tissue spindles that hold standard-core rolls up to
5-1/4'' (135mm) diameter (1800 sheets). Spindles shall be removable from cabinet only when door is open. Manufacturer's service and
parts manual shall be provided to the building owner/manager upon request.

Surface-Mounted Seat-Cover Dispenser, Sanitar y Napkin Disposal, And Toilet Tissue Dispenser shall be Model B-3579
of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jack son, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 1/08 R/A, S/D Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.