Bobrick B-3541 Specifications

Surface-Mounted

Technical Data

Sanitary diSpoSal

Bag diSpenSer

3-3/4"

95mm

5/8"

16mm

4-1/8"

105mm

1-7/8"

45mm

S

B-3541

1"

25mm

S

5-5/16"

135mm

S

Finish Face of Wall

MaterialS:

Cover – 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish.

Wall Plate – 18-8 S, type-304, 22-gauge (0.8mm) stainless steel.

operation:

Sanitary disposal bag pulls out. Cover snaps off for filling. Capacity: one sanitar y disposal box.

inStallation:

For partitions with par ticle-board or other solid core, secure with two #8 x 1/2'' (M4.2 x 12.5mm) sheet-metal screws (not fur­nished) at all points indicated by an S, or provide through-bolts, nuts, and washers.

For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed
back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle
bolts or expansion bolts.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws.

Specification:

Surface-mounted sanitar y disposal bag dispenser shall be type-304 stainless steel. Exposed surfaces shall have satin finish.
Cover shall snap off wall plate for refilling. Unit shall have a capacity of one sanitary disposal bag box.

Surface-Mounted Sanitar y Disposal Bag Dispenser shall be Model B-3541 of Bobrick Washroom Equipment, Inc.
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.