Bobrick B-354 User Manual
Technical Data
partitiOn-mOunted
sanitary napkin
dispOsal
(serves twO tOilet cOmpartments)
12-3/4''
325mm
S
12-3/16''
310mm
S
7/16''
11mm
15-3/16''
385mm
17-3/16''
435mm
11-3/16''
285mm
Door
20-1/2"
520mm
to Back Wall
S
S
10-3/4''
275mm
Sanitary
Napkin
Disposal
Panel
Fixed
Flange
B-354
1/2'' Min. to 1-1/4'' Max.
13 to 32mm
Partition Thickness
S
S
4-1/16''
105mm
S
Sanitary Napkin
Disposal Panel
Permanent
Panel
Lock & Key
Removable
Waste Receptacle
Adjustable
Flange
S
785mm
31''
for Universal / Barrier-Free Design
Recommended Mounting Height Off Floor
Rough Partition Cutout
11" (280mm) wide
15-1/2" (395mm) high
1/2" to 1-1/4" (13 to 32mm)
partition thickness
materials:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flanges (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel
piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Disposal Panels (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edges hemmed for safety.
Secured to door and permanent panel with spring-loaded, full-length stainless steel piano-hinges. Equipped with international
graphic symbols identifying sanitary napkin disposal.
Waste Receptacle — Leak-proof, rigid molded polyethylene. Removable for servicing. Capacity: 1.2-gal. (4.6-L).
OperatiOn:
Unit is equipped with a self-closing panel covering each disposal opening. Napkin disposal is emptied by opening door with
furnished key and removing waste receptacle. Disposable paper liners for the receptacle are available as an optional accessory:
order Bobrick Part No. 353-12.
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
installatiOn:
Mounts in toilet partition 1/2" to 1-1/4" (13 x 32mm) thick, centered through a cutout specially ordered from partition
manufacturer or field cut. Dimensions of cutout are to be 11" wide x 15-1/2" high (280 x 395mm). For factory-made cutouts,
location and size details should be furnished to partition manufacturer. For hollow-core metal partitions, solid framing into
which mounting sheet-metal screws can be secured is required.
For installation with sheet-metal screws furnished, place unit firmly in partition opening, making sure the entire perimeter of
fixed flange is tight against partition sur face, then secure to partition with sheet-metal screws furnished, through four holes
in fixed flange at points indicated by an S. On other side of partition, position adjustable flange so the mounting screw holes
are not inline with mounting screw holes in fixed flange. Make sure the entire perimeter of adjustable flange is tight against
partition sur face, then secure with sheet-metal screws furnished.
For through-bolting method of installation, make sure that mounting holes in adjustable flange are inline with holes in fixed
flange. Using adjustable flange as template for locating centers, drill 7/32" or 1/4" (5.5 or 6.4mm) holes through partition.
Provide four binder post and #6 (3.5mm) flat-head sheet-metal screws to secure unit and its adjustable flange. Obtain binder
posts and sheet-metal screws by ordering Bobrick Binder Post Kit No. 354-119 for partitions 1/2" (13mm) thick or Kit No. 354124 for partitions 3/4" to 1-1/4" (19 to 32mm) thick.
Designer's Note: Cutouts in Bobrick toilet partitions can be pre-cut for Bobrick partition-mounted accessories at factor y if
location and size of cutouts are specified and the order for both partitions and accessories are received together.
specificatiOn:
Partition-mounted sanitar y napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Flanges shall be drawn and beveled, one-piece seamless construction. Unit shall mount in par tition and
serve two toilet compartments. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped
with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall have a self-closing panel covering each disposal
opening. Panels shall have bottom edges hemmed for safety, be secured to door with spring-loaded, full-length stainless steel
piano-hinges, and equipped with international graphic symbols identifying sanitar y napkin disposal. Unit shall be furnished
with a removable, leak-proof molded polyethylene receptacle. Receptacle shall have a capacity of 1.2-gal. (4.6-L). Manufacturer’s
service and parts manual shall be provided to the building owner/manager upon request.
Partition-Mounted Sanitar y Napkin Disposal shall be Model B-354 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-354 Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...