Bobrick B-353 User Manual

10-13/16''

275mm

Sanitary

Napkin

Disposal

Panel

3-15/16"

100mm

S

S

S

17-3/16''

435mm

12-3/4''

325mm

Removable

Waste

Receptacle

Lock

& Key

Recommended Mounting Height Off Floor

For Universal / Barrier-Free Design

30''

760mm

2-3/4''

70mm

Typ.

Door

1/8"

3mm

Finish Face of Wall

15-1/4"

385mm

3-5/8"

90mm

8"

205mm

recessed

Technical Data

sanitary napkin

dispOsal

B-353

Rough Wall Opening

11-1/4" (285mm) wide

15-5/8" (395mm) high

4" (102mm) minimum

recessed depth

materials:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-

hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Disposal Panel — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edge hemmed for safety. Secured to

door with a spring-loaded, full-length stainless steel piano-hinge. Equipped with an international graphic symbol identifying sanitar y
napkin disposal.

Waste Receptacle — Leak-proof, rigid molded polyethylene. Removable for servicing. Capacity: 1.2-gal. (4.6-L).

OperatiOn:

Unit is equipped with a self-closing panel covering disposal opening. Napkin disposal is emptied by opening door with furnished key
and removing waste receptacle. Disposable paper liners for the receptacle are available as an optional accessor y: order Bobrick Part
No. 353-12.

installatiOn:

Provide framed rough wall opening 11-1/4" wide x 15-5/8" high (285 x 395mm). Minimum recessed depth required from finish face of
wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate
with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all
points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).

specificatiOn:

Recessed sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin
finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler lock keyed like other
Bobrick washroom accessories. Unit shall have a self-closing panel covering disposal opening. Panel shall have bottom edge hemmed
for safety, be secured to door with a spring-loaded, full-length stainless steel piano-hinge, and equipped with an international graphic
symbol identifying sanitary napkin disposal. Unit shall be furnished with a removable, leak-proof molded polyethylene receptacle.
Receptacle shall have a capacity of 1.2-gal. (4.6-L). Manufacturer’s service and parts manual shall be provided to the building owner/
manager upon request.

Recessed Sanitary Napkin Disposal shall be Model B-353 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.