Bobrick B-352 User Manual
13-7/8''
350mm
T
T
27-7/8''
710mm
S
S
T
T
11-15/16"
305mm
1"
25mm
1-11/32"
35mm
S
S
Lock & Key (2)
Coin Slots (2)
Handle
Adjustable
Flange
3/4"
19mm
1/8"
3mm
1/8" to 2-3/8"
3 to 60mm
Finish Face of Wall
T
4" to 6-3/8"
100 to 160mm
S
S
25-7/8"
655mm
6-1/2"
165mm
T
Recommended Mounting Height Off Floor
74'' to 78''
1880 to 1980mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
60-1/2''
1535mm
RECESSED
Technical Data
MATERIALS:
NAPKIN/TAMPON
VENDOR
B-352 25
Rough Wall Opening
12-1/2" (320mm) wide
26-3/8" (670mm) high
4" to 6-1/2"
(102 to 165mm) minimum
recessed depth
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construc tion.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction.
Adjustable escutcheon-type flange permits semi- or fully-recessed installation.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel pianohinge. Equipped with two tumbler locks keyed like other Bobrick washroom accessories. Door has no brand-name advertising for
products dispensed. International graphic symbols identify products dispensed and coin denomination.
Coin Mechanisms (2) — Single-coin mechanisms for 25¢ operation. Each coin box is equipped with a tumbler lock and opens with
different key than furnished for door. Coin mechanisms do not require lubrication. All moving parts are replaceable without removing
cabinet from wall.
OPERATION:
After coin is inserted in dispensing mechanism of patron's choice, turning appropriate handle dispenses boxed sanitary napkin or
tampon tube. Coin slot of each dispensing mechanism is identified by an international graphic symbol. Capacity: 30 sanitar y napkins
and 27 tampons. Coin slots are blocked when supply is depleted. Vendor dispenses sanitary napkin packages measuring 3'' x 1'' x
4-1/4'' (75 x 25 x 110mm) and tampon packages measuring 5-1/8'' long x 11/16'' diameter (130 x 17mm).
INSTALLATION:
Provide framed rough wall opening 12-1/2" wide x 26-3/8" high (320 x 670mm). Minimum recessed depth required to finish face of
wall for fully recessing the unit is 6-1/2" (165mm). Allow clearance for construction features that may protrude into opening from
opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount flange in rough wall depth with four
sheet-metal screws, furnished by manufacturer, at points indicated by an S. Insert cabinet into flange to wall depth available, then
secure unit with four sheet-metal screws, furnished by manufacturer, at points indicated by a T.
SPECIFICATION:
Recessed napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary napkins or tampons at
user's option. Unit shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have satin finish. Door shall
be 18 gauge (1.2mm), secured to cabinet with a full-length stainless steel piano-hinge, and equipped with two tumbler locks keyed like
other Bobrick washroom accessories. Each coin box shall be equipped with a tumbler lock that is keyed differently than door locks.
Vendor shall be equipped with 25¢ coin mechanisms and shall carry no brand-name adver tis ing. Manufacturer's service and parts
manual shall be provided to the building owner/manager upon request.
Recessed Napkin/Tampon Vendor shall be Model B-352 25 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...