Bobrick B-3479 User Manual

Technical Data

ClassicSeries™

SURFACE-MOUNTED

SEAT-COVER AND

TOILET TISSUE DISPENSER

B-3479

Dispenser

1-1/8''

30mm

Typ.

Finish Face of Wall

4-3/16''

105mm

Door

Cabinet

S

1525mm

60''

Recommended Mounting Height Off Floor

S

MATERIALS:

30-7/8''

785mm

Lock

Lock

& Key

17-3/16''

S

S

15-3/16''

385mm

12-5/16''

285mm

Centerline of Toilet Tissue

7'' to 9'' (180 to 230mm)

435mm

C

L

Dispenser shall be

in Front of Toilet

4-7/8''

100mm

S

Dispenser (2)

S

Toilet-Seat-Cover

Toilet Tissue

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed sur faces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless

construc tion.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless construction. Secured to

cabinet with a full-length stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom
accessories.

Toilet Tissue Dispensers (2) — .100" (2.5mm) thick ABS. Equipped with two theft-resistant, heavy-duty, one-piece, molded
ABS spindles.

OPERATION:

Toilet-seat-cover dispenser holds 1000 single- or half-fold paper covers. Door unlocks with key provided and swings open for
filling. Spindles may be removed from cabinet only when door is open. Unit holds two standard-core toilet tissue rolls up to
5-1/4'' (135mm) diameter (1800 sheets).

INSTALLATION:

Mount unit on wall with four #8 x 1-1/4'' (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For
plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with screws.
For other wall surfaces, provide fiber plugs or expansion shields for use with screws, or provide 1/8" (3mm) toggle bolts or
expansion bolts.

SPECIFICATION:

Surface-mounted toilet-seat-cover and toilet tissue dispenser shall be type-304 stainless steel with all-welded constr uction;
exposed surfaces shall have satin finish. Toilet tissue dispenser shall be ABS plastic. Flange shall be drawn and beveled,
one-piece, seamless construction. Unit shall be mounted on side wall of single toilet compar tment. Door shall be one-piece,
seamless construction; secured to cabinet with a full-length stainless steel piano-hinge; and equipped with two tumbler locks
keyed like other Bobrick washroom accessories. Toilet-seat-cover dispenser shall hold 1000 paper covers. Unit shall be
equipped with two theft-resistant, heavy-duty ABS toilet tissue spindles that hold standard-core rolls up to 5-1/4'' (135mm)
diameter (1800 sheets). Spindles shall be removable from cabinet only when door is open. Manufacturer's service and parts
manual shall be provided to the building owner/manager upon request.

Surface-Mounted Seat-Cover And Toilet Tissue Dispenser shall be Model B-3479 of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jack son, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 1/08* R/A, S/D Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.