Bobrick B-318 User Manual

Technical Data

S

S

10-9/16''

270mm

11-7/16''

290mm

18''

455mm

12-11/16''

320mm

S

S

Paper Towel Tray

with Self-Closing Panels

2-1/2''

65mm

16-1/8''

410mm

3-9/16''

90mm

3/8''

10mm

S

S

5/8''

16mm

4-5/16''

110mm

5/16''

8mm

Recommended Mounting Height Off Floor

68'' to 73''

1725 to 1855mm

Recommended Mounting Height Off Floor

For Barrier-Free Design

56-3/4"

1440mm

RECESSED

PAPER TOWEL

B-318

DISPENSER

(with Towel Cabinet Concealed in Wall)

Rough Wall Opening

18-1/4" (465mm) high to accept cabinet height plus

6" (152mm) minimum clearance below cabinet
4-1/2" (114mm) minimum recessed depth plus

MATERIALS:

12" (305mm) wide

thickness of wall finish

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.

Paper Towel Tray — 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Equipped with two self-closing piano-

hinged panels. Capaci ty: 600 C-fold or 800 multifold paper towels.

OPERATION:

Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or the use of adapters. Only the paper
towel tray is visible when properly installed. Unit is loaded from bottom by pushing towels up through self-closing panels of
paper towel tray.

Designer's Notes: Model B-318 is designed for installation in wall prior to installation of surface-mounted framed or unframed
mirror (not furnished as part of Model B-318). Bobrick B-290 Series stainless steel angle-frame mirrors are suggested for
installation in combination with Model B-318. For standard installations, it is recommended that the unit be located between two
lavatories. Installation in a non-mirror side wall is recommended where access is needed by physically disabled persons.

INSTALLATION:

Provide framed rough wall opening 12'' (305mm) wide; height should be at least 24-1/4" (615mm), allowing 6" (152mm)
minimum recess space below unit for access to towels. Minimum recessed depth required is 4-1/2" (114mm) plus thickness of
wall finish. Allow cleara nce for construction features that may protrude into rough wall opening from opposite wall. Coordinate
with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and
mounting tabs at four points indicated by an S, then secure unit to framing with #8 x 1¼'' (4.2 x 32mm ) sheet-metal screws (not
furnished).

SPECIFICATION:

Recessed paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have
satin finish. Paper towel tray shall be equipped with two self-closing piano-hinged panels. Unit shall dispense 600 C-fold or 800
multifold paper towels without adjustment or use of adapters. Manufacturer's service and parts manual shall be provided to the
building owner/manager upon request.

Recessed Paper Towel Dispenser shall be Model B-318 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.