Bobrick B-3094 User Manual

Technical Data

ClassicSeries™

RECESSED

SANITARY NAPKIN DISPOSAL

AND TOILET TISSUE DISPENSER

B-3094

1''

25mm

Typ.

12-3/4''

325mm

S

Lock & Key

17-3/16''

435mm

S

15-3/16''

385mm

S

Removable Waste

Receptacle

Finish Face of Wall

1/4''

6mm

Disposal

Panel

S

Toilet

Tissue

Dispenser

(2)

Flange

4''

100mm

10-3/4''

275mm

Off Floor for

Universal / Barrier-Free Desgin

2''

50mm

Typ.

Rough Wall Opening

15-5/8'' (395mm) wide
11-1/4'' (285mm) high

4-1/16'' (105mm) minimum

recessed depth

Recommended Mounting Height

760mm

30''

MATERIALS:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construc tion.
Disposal Panel — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Self-closing panel is secured to cabinet with a spring-

loaded, full-length stainless steel piano-hinge and equipped with an international graphic symbol identifying napkin disposal.
Waste Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Equipped with a tumbler lock keyed like other

Bobrick washroom accessories. Capacity: 3/4-gal. (2.8-L).
Toilet Tissue Dispensers (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Equipped with two chrome-plated plastic

spindles, each with a heavy-duty internal spring.
Designer's Note: Model B-3094.60 is equipped with two theft-resistant toilet tissue spindles, which require special key for removal.

OPERATION:

Unit holds two standard-core toilet tissue rolls up to 5-1/4'' (135mm) diameter (1800 sheets). Receptacle unlocks with key provided and slides
out for servicing.

Designer's Note: It is recommended that one full toilet tissue roll remain wrapped until the other roll has been depleted to avoid wasting ends of
both rolls. Disposable paper liners for the receptacle are available as an optional accessory: order Bobrick Part No. 3094-12.

INSTALLATION:

Provide framed rough wall opening 15-5/8'' wide x 11-1/4'' high (395 x 285mm). Mini mum recessed depth required from finish face of wall is
4-1/16'' (105mm). Allow clearance for construction features that may protr ude into rough wall opening from opposite wall. Coordinate with
mechani cal engineer to avoid pipes, vents, and conduits. Mount cabinet with shims between framing and cabinet at all points indicated by an S,
then secure unit with sheet-metal screws furnished by manufacturer.

SPECIFICATION:

Recessed sanitary napkin disposal and toilet tissue dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Self-closing disposal panel shall be secured to
cabinet with a spring-loaded, full-length stainless steel piano-hinge and equipped with an international graphic symbol identifying napkin
disposal. Removable waste receptacle shall be equipped with a tumbler lock keyed like other Bobrick washroom accessories and shall have a
minimum capacity of 3/4-gal. (2.8-L). Unit shall be equipped with two chrome-plated plastic toilet tissue spindles that hold standard-core rolls
up to 5-1/4'' (135mm) diameter (1800 sheets). Manufacturer's service and parts manual shall be provided to the building owner/manager upon
request.

To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant toilet tissue spindles shall be removable only with
special key provided.

Recessed Sanitar y Napkin Disposal And Toilet Tissue Dispenser shall be Model B-3094 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jack son, Tennessee; Los Angeles, Califor nia; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 9/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.