5-1/2''
140mm
S
S
9-1/2''
240mm
8''
205mm
7/8''
22mm
5/8''
15mm
Level Indicator
Lock & Key
Soap Valve
3''
75mm
3-13/16''
95mm
23/32''
18mm
Typ.
2-1/16''
50mm
S
4-1/8''
105mm
1/4''
6mm
2-1/4''
55mm
Typ.
Finish Face of Wall
Soap Vessel
Recommended Mounting Height Off Floor
For Universal / Barrier-Free Design
47-3/4'' 1215mm
recessed
Technical Data
Patented
soap dispenser
with soap vessel
B-306
Rough Wall Opening
8-3/8" (210mm) wide
4-3/8" (110mm) high
3-7/8" (98mm) minimum
recessed depth
materials:
Recessed Mounting Box — 18-8 S, type-304 stainless steel. All-welded construction. Completely enclosed.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 1/4" (6mm) 90° return edges for maximum rigidity.
Secured to mounting box with a concealed stainless steel piano-hinge. Equipped with a polycarbonate refill-indicator window
and a tumbler lock keyed like other Bobrick washroom accessories.
Soap Vessel — Molded plastic. Large opening equipped with plastic cover. Capacity: 45-fl oz (1.3-L).
Soap Valve — Valve mechanism with O-ring seals. Stainless steel inner spring and spout. Chrome-plated brass housing.
operation:
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve operates with one hand, without
tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free
accessibility guidelines (including ADAAG in U.S.A.). Window indicates when refilling is required. Door secured to mounting
box unlocks with key provided and swings open 90° for filling without removing from wall.
installation:
Provide framed rough wall opening 8-3/8" wide by 4-3/8" high (210 x 110mm). Minimum recessed depth required from
finish face of wall is 3-7/8" (98mm). Allow clearance for construction features that may protrude into rough wall opening from
opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. Mount cabinet with shims between
framing and cabinet at all points indicated by an S, then secure unit with screws furnished by manufacturer.
Note: Place unit as close to top of deck of lavatory as plumbing vent code will permit and with bottom of door high enough to
clear fixture trim.
specification:
Recessed soap dispenser, including mounting box shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin finish. Valve shall be operable with one hand and with less than 5 pounds of force (22.2 N) to comply
with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Door shall have molded plastic soap container with
plastic cap attached to back, equipped with a soap refill-indicator window and tumbler lock keyed like other Bobrick washroom
accessories, and shall have concealed stainless steel piano-hinge. Corrosion-resistant valve shall dispense commercially
marketed all-purpose hand soaps. Soap vessel shall have a capacity of 45-fl oz (1.3-L). Manufacturer's service and parts manual
shall be provided to the building owner/manager upon request.
Recessed Soap Dispenser shall be Model B-306 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...