Bobrick B-3013 User Manual

recesseD

Technical Data

toilet-seat-coVer

Dispenser

17-9/16''

445mm

S

Door

S

Lock & Key

15-1/2''

395mm

Finish Face of Wall

13-1/16''

S

8-1/2''

215mm

S

330mm

9/16''

14mm

1-1/2''

40mm

B-3013

11-1/16''

280mm

S

2-1/2''

65mm

Rough Wall Opening

15-7/8" (405mm) wide

11-7/16" (290mm) high

2-3/4" (70mm) minimum

recessed depth

59'' 1500mm

Recommended Mounting Height Off Floor

Recommended Mounting Height Off Floor

1220 mm

48''

For Barrier-Free Design

materials:

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.

Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity.

Secured to cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other
Bobrick washroom accessories.

operation:

Dispenses single- or half-fold paper toilet seat covers. To fill dispenser, door unlocks with key provided. Capacity: 500 toilet seat
covers.

installation:

Provide framed rough wall opening 15-7/8" wide x 11-7/16" high (405 x 290mm). Minimum recessed depth required from
finish face of wall is 2-3/4" (70mm). Allow clearance for construction features that may protrude into rough wall opening from
opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount cabinet with shims
between framing and cabinet at all points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal
screws (not furnished).

specification:

Recessed toilet-seat-cover dispenser shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have
satin finish. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a concealed, full­length stainless steel piano-hinge; and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Dispenser
shall have a minimum capacity of 500 paper toilet seat covers. Manufacturer’s service and parts manual shall be provided to the
building owner/manager upon request.

Recessed Toilet-Seat-Cover Dispenser shall be Model B-3013 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 3/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.