Bobrick B-301 User Manual

recesseD
Technical Data
toilet-seat-coVer
Dispenser
S
S
25mm
10-3/4''
275mm
1''
25mm
S
S
Lock & Key
15-3/16''
385mm
Finish Face of Wall
1-11/16''
5-1/2''
140mm
2-5/8''
65mm
1''
45mm
3/16''
5mm
2-9/16''
65mm
B-301
S
1500mm
59''
Recommended Mounting Height Off Floor
Rough Wall Opening
15-5/8" (395mm) wide
11-1/4" (285mm) high
2-5/8" (67mm) minimum
recessed depth
Recommended Mounting Height Off Floor
1220mm
48''
For Barrier-Free Design
materials:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless con-
struction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length, stainless steel piano-hinge. Beveled opening. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
operation:
Dispenses single- or half-fold paper toilet seat covers. To fill dispenser, door unlocks with key provided. Capacity: 500 toilet seat covers.
installation:
Provide framed rough wall opening 15-5/8" wide x 11-1/4" high (395 x 285mm). Minimum recessed depth required from finish face of wall is 2-5/8" (67mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
specification:
Recessed toilet-seat-cover dispenser shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be secured to cabinet with a full­length, stainless steel piano-hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Dispenser shall have a capacity of 500 paper toilet seat covers. Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
Recessed Toilet-Seat-Cover Dispenser shall be Model B-301 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...