Technical Data
TILT MIRROR
WITH STAINLESS STEEL
FRAME
B-294
SERIES
5/8''
16mm
Typ.
S
S
S
3/4''
19mm
STANDARD STOCK SIZES
MODEL
NO.
B-294 1630 16'' (41cm) 30'' (76cm) 8-11/16'' (22cm) 18-11/16'' (48cm)
Other sizes up to 24" x 36" (61 x 91cm) or 36'' x 24'' (91 x 61cm) are available on special
order; minimum size available, 12'' x 18'' (30 x 46cm).
OVERALL SIZE
W
H
TILT DIMENSION
FROM WALL
T
DIMENSION FROM
BRACKET TO HINGE
W
S
B
MATERIALS:
S
S
3/4''
19mm
Typ.
S
S
in Tilt Position
Bracket (2)
Finish Face of Wall
3/4''
19mm
Typ.
Support
H
Mirror
Piano-Hinge
T
1-1/8''
30mm
B
3/8''
10mm
S
Recommended Mounting Height Off Floor
Frame — 18-8 S, type 304, heavy-gauge stainless steel, 3/4" x 3/4" (19 x 19mm) angle with satin finish. One-piece, roll-formed
construction forms continuous integral stiffener on all sides. Bevel design on front holds frame tightly against mirror. Corners are
welded, ground, and polished smooth. Galvanized steel back is fastened to frame with concealed screws. Full-width stainless steel
piano-hinge is welded to bottom of frame.
Designer's Note: Type 304 stainless steel provides superior corrosion resistance, compared to 400 Series stainless steel, against
environmental moisture, hose-down maintenance and strong cleaning solutions.
Mirror — No. 1 quality, 1/4" (6mm) select float glass, selected for silvering; electrolytically copper-plated by the galvanic process,
guaranteed for 15 years against silver spoilage. All edges are polished and protected by plastic filler strips; back is protected by full-size,
shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.
Support Bracket (2) — Heavy-gauge plated steel. Self-locking folding operation. Securely riveted to frame.
OPERATION:
Self-locking operation of folding brackets holds mirror flush to wall. Mirror can easily be tilted forward and secured to provide full
visibility for wheelchair patients in hospitals and nursing homes.
39-1/4" Max. 995mm
INSTALLATION:
Mount vertically on wall with eight screws, (not furnished), at points indicated by an S. For plaster or dr y wall construction, provide
concealed backing to comply with local building codes, then secure unit with screws (not furnished). For other wall sur faces, provide
fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Tilting mirror shall have a one-piece type 304 stainless steel angle frame, 3/4" x 3/4" (19 x 19mm) with continuous integral stiffener
on all sides and beveled front to hold frame tightly against mirror; corners shall be welded, ground, and polished smooth; all exposed
surfaces shall have satin finish with ver tical grain. Frame shall be equipped with full-width stainless steel piano-hinge welded to bottom
and two heavy-gauge plated-steel folding support brackets that lock mirror in upright or for ward tilt position. Select float glass mirror
shall be guaranteed for 15 years against silver spoilage. All edges shall be protected by plastic filler strips. Back shall be protected
by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding. Galvanized steel back shall be
secured to frame with concealed screws.
Tilting Mirror shall be Model B-294 ___________________ (insert width and height) of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 1/28/11
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.
R/A, S/B
1!0rinted in U.S.A.
Loading...