Bobrick B-294 Specifications

PRODUCT SPECIFICATION

Tilt mirror with stainless steel frame, Bobrick Model B-294

Tilting mirror shall have a one-piece type-304 stainless steel angle
frame, 3/4" x 3/4" (19 x 19mm) with continuous integral stiffener on
all sides and beveled front to hold frame tightly against mirror;
corners shall be welded, ground, and polished smooth; all exposed
surfaces shall have satin finish with vertical grain. Frame shall be
equipped with full-width stainless steel piano-hinge welded to bottom
and two heavy-gauge plated-steel folding support brackets that lock
mirror in upright or forward tilt position. Select float glass mirror
shall be guaranteed for 15 years against silver spoilage. All edges
shall be protected by plastic filler strips. Back shall be protected by
full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm)
thick polyethylene padding. Galvanized steel back shall be secured
to frame with concealed screws.