PRODUCT SPECIFICATION
Stainless steel, welded, angle frame mirror, Bobrick Model
B-290 Series.
Mirror shall be framed with one-piece, type-304, stainless steel
angle 3/4" x 3/4" (19 x 19mm). Frame shall be roll-formed
construction with continuous integral stiffener on all sides.
Frame shall have beveled design on front of angle to hold mirror
tightly against frame to prevent exposure to sharp edges. Corners
shall be heliarc welded, ground, and polished smooth. Exposed
surfaces shall have satin finish with vertical grain. Mirror shall
be No. 1 quality, 1/4" (6mm) float/plate glass. All mirror edges
shall be protected with plastic filler strips. Mirror back shall be
protected by full-size, shock-absorbing, water-resistant,
non-abrasive 3/16" (5mm) thick polyethylene padding.
Galvanized steel back shall have integral horizontal hanging
brackets located at top and bottom for mounting on concealed
one-piece rectangular wall hanger(s). Galvanized steel back shall
be fastened to frame with concealed screws to permit glass
replacement; attachment by rivets or tabs is not acceptable.
Mirror shall be secured to hanger with concealed Phillips head
locking setscrews in bottom of frame.
Loading...