Bobrick B-2890 User Manual

Surface-Mounted

Technical Data

Single JuMBo-roll

toilet tiSSue diSPenSer

Mount Within 12''

(305mm) of Front of Toilet Seat

Viewing Slot

(25mm)

Typ.

1-43/64''

1''

(45mm)

S

3-11/32''
(85mm)

5-11/32''

(135mm)

10-21/32''

(271mm)

S

3-1/8''

(80mm)

1/2''

(12mm)

Typ.

(230mm)

6-5/8''

(170mm)

S

Door

9-1/8''

S

S

Lock

S

B-2890

Finish Face of Wall

Back Plate

10-45/64''

4-29/64''

(115mm)

(270mm)

Recomended Mounting Height Off Floor

Pivot Point

Material:

Mounting Plate — 16-gauge (1.6mm) steel with powder-coated finish.

Door — Type-430, 22-gauge (0.8mm) stainless steel with satin-finish. Slot reveals toilet tissue supply inside cabinet. Equipped with a

lock not keyed like other Bobrick Washroom Equipment accessories.

Spindle — Removable plastic spindle adapter converts to smaller spindle. Fixed inner spindle, 20 gauge (0.9mm) steel with powder
coated finish.

oPeration:

Door unlocks with key provided and swings down for loading dispenser. Spindle adapter accommodates one toilet tissue roll up to 10"
(255mm) diameter with 3" (75mm) core, or remove the plastic spindle adapter to accommodate a 1-5/8" (40mm) diameter core roll.
Rubber o-rings (2) (furnished by manufacturer) may be added to the steel inner spindle to accommodate a 2-1/8" (55mm) diameter
core roll. Wide viewing slot in door reveals the amount of toilet tissue on roll. Unit is designed for quick reloading.

29-1/2'' (750mm)

for Universal/Barrier-Free Design

inStallation:

Mount unit on wall or toilet partition with five sheet-metal screws (not furnished) at points indicated by an S. Rear edge of unit should
be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard toilet that projects 30" (305mm) from
back wall.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal
screws (not furnished). For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal screws (not
furnished), or provide 6mm (1/4") toggle bolts or expansion bolts.

For partitions with par ticle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts,
and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. If two units are
installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

SPecification:

Single jumbo-roll toilet tissue dispenser door shall be 22-gauge (0.8mm) stainless steel with satin-finish. Door shall be equipped with
a lock not keyed like other Bobrick washroom accessories. Door shall have a slot to reveal toilet tissue supply inside cabinet. Spindle
adapter shall accommodate one toilet tissue roll up to 10" (255mm) diameter with 3" (75mm) core. Spindle shall be convertible in the
field to dispense a 1-5/8" (40mm) diameter core roll by removing plastic spindle adapter. Spindle shall be convertible in the field to
dispense a 2-1/8" (55mm) diameter core roll by adding rubber o-rings (2) furnished. Manufacturer's service and parts manual shall be
provided to the building owner/manager upon request.

Single Jumbo-Roll Toilet Tissue Dispenser shall be Model B-2890 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 12/08 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.