Bobrick B-287 User Manual

Technical Data

4-5/8''

115mm

5-13/16''

150mm

S

S

2-3/8''

60mm

S

1-1/4''

30mm

2-1/4''

55mm

14-9/16''

370mm

Shelf Position

When in Use

Shelf Position

When Not in Use

1-1/2''

40mm

Finish Face of Wall

FOLDING

B-287

UTILITY SHELF

Patented

MATERIALS:

Shelf — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Equipped with heavy-duty internal spring.

Mounting Bracket — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish.

OPERATION:

Shelf holds 100 lbs (45.36 Kg) when properly installed. Shelf automatically returns to upright position when object is removed.
Toilet compartment door cannot be opened when shelf is in use.

INSTALLATION:

Mount unit on wall or toilet partition adjacent to latch side of compar tment door with two sheet-metal screws, furnished by
manufacturer, at points indicated by an S.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal screws
furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.

For partitions with par ticle-board or other solid core, secure unit with sheet-metal screws furnished or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which furnished sheet-metal screws can be
secured. If two units are installed back-to-back, provide threaded sleeves and machine screws for the full thickness of par tition.

Note: Provide 5" (125mm) minimum clearance from the inside surface of toilet compartment door to the front edge of shelf
to allow door to swing open and close. Provide 14-7/8" (380mm) minimum clearance above the mounting screw holes to the
underside of any horizontal projection.

SPECIFICATION:

Folding utility shelf shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have satin finish.
Shelf shall be equipped with a heavy-duty internal spring. Shelf holds 100 lbs (45.36 Kg) when properly installed. Shelf shall
automatically return to upright position when not in use.

Folding Utility Shelf shall be Model B-287 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 9/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.