Technical Data
SURFACE-MOUNTED
ROLL TOWEL DISPENSER
11-11/16''
295mm
9-9/16''
245mm
S S
1-1/16''
25mm
Door
Lock
& Key
Paper Towel
Feed Wheel
Veiwing
Slot
Finish Face of Wall
B-2860
13/16''
21mm
S
8-3/16''
210mm
S
13''
330mm
15''
380mm
Patented
S S
S
Optional
7-3/4''
195mm
10-3/4''
275mm
S
Optional
1-7/8''
50mm
8-15/16''
225mm
S
Optional
Cabinet
Recommended Mounting Height
for Barrier-Free Design
67'' to 74'' 1700 to 1880mm
Recommended Mounting Height
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish. Equipped with a
tumbler lock keyed like other Bobrick washroom accessories.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge.
Roll Towel Mechanism — Durable, high-impact resin materials. Accepts standard-core rolls up to 8" (205mm) wide, 8" (205mm) diameter.
Dispenses one 12" (305mm) length of towel per pull. Accommodates up to 3-1/2" (90mm) diameter stub roll with automatic transfer to full roll.
OPERATION:
Touch-Free pull towel dispensing mechanism dispenses one 12" (305mm) length of towel per pull and operates smoothly and quietly. User
only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for user to advance paper should it
become necessary to feed paper through dispenser. Automatic transfer dispenses stub roll before new roll is dispensed. When stub roll is
depleted, advancement of paper towel feed wheel allows the main roll to start dispensing without the need to open the dispenser. Dispenser
accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non-perforated paper towel rolls and pull force to operate 1.8 pounds (8.0 N) to
comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
INSTALLATION:
Mount unit on wall with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. Optional mounting
screw locations available, at installer’s discretion. For plaster or dry wall construction, provide concealed backing to comply with local building
codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.
60'' to 66'' 1525 to 1675mm
SPECIFICATION:
Surface-mounted roll-paper-towel dispenser shall be type-304 stainless steel with all-welded constr uction; exposed surfaces shall have satin
finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge. Unit shall be equipped with a tumbler lock keyed like
other Bobrick washroom accessories. Towel mechanism accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non-perforated
paper towel rolls. Touch-Free pull towel mechanism dispenses one 12" (305mm) length of towel paper per pull. User only touches the paper.
Automatic transfer shall dispense stub roll up to 3-1/2" (90mm) diameter before new roll is dispensed. Equipped with paper towel feed
wheel for use in filling the dispenser, for user to advance paper should it become necessary to feed paper through dispenser. Paper towels
are dispensed with pull force to operate 1.8 pounds (8.0 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Roll-Paper-Towel Dispenser shall be Model B-2860 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.