Technical Data
SuRFACE-MOuNTEd
NAPkIN/TAMPON vENdOR
Finish Face of Wall
6-1/2''
165mm
25-7/8''
655mm
11-7/8''
300mm
Lock & Key
B-282 25
3-1/2''
90mm
S
14''
355mm
1880 to 1980mm
1535mm
60-1/2''
For Barrier-Free Design
Recommended Mounting Height Off Floor
2-1/2''
65mm
S
4-1/2''
115mm
Coin Slots
Handle
Lock
1-13/16''
45mm
S
3/4''
19mm
S
74'' to 78''
Recommended Mounting Height Off Floor
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless
steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom accessories. Door has no brand-name
advertising for products dispensed. Interna tional graphic symbols identify products dispensed and coin denomination.
Coin Mechanisms (2) — Single-coin mechanisms for 25¢ operation. Each coin box is equipped with a tumbler lock and
opens with different key than furnished for door. Coin mechanisms do not require lubrication. All moving parts are replaceable
without removing cabinet from wall.
OPERATION:
After coin is inserted in dispensing mechanism of patron’s choice, turning appropriate handle dispenses boxed napkin or
tampon tube. Coin slot of each dispensing mechanism is identified by an international graphic symbol. Capacity: 30 napkins
and 27 tampons. Coin slots are blocked when supply is depleted. Vendor dispenses napkin packages measuring between
2-7/8'' x 3/4'' x 4-1/8'' minimum to 3-1/8" x 1-1/8" x 4-3/8" maximum (73 x 19 x 105 to 80 x 29 x 111mm) and tampon packages
measuring between 4-5/8" long x 9/16" diameter minimum to 5-1/8'' long x 3/4'' diameter maximum (118 x 14 to 130 x 19mm).
INSTALLATION:
Mount unit on wall with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal
screws (not furnished). For other wall construction, provide fiber plugs or expansion shields for use with sheet-metal screws, or
provide 1/8" (3mm) toggle bolts or expansion bolts. If unit projects above top of wainscot, provide aluminum channel or other
filler to eliminate gap between unit and finish face of wall.
SPECIFICATION:
Surface-mounted napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary napkins
or tampons at user’s option. Unit shall be type-304 stainless steel with all-welded construction; exposed sur faces shall have
satin finish. Door shall be 18 gauge (1.2mm), secured to cabinet with a full-length stainless steel piano-hinge, and equipped
with two tumbler locks keyed like other Bobrick washroom accessories. Each coin box shall be equipped with a tumbler lock
that is keyed differently than door locks. Vendor shall be equipped with 25¢ coin mechanisms and shall carr y no brand-name
advertising. Manufacturer's service and par ts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Napkin/Tampon Vendor shall be Model B-282 25 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...