Bobrick B-279 User Manual

Technical Data

surface-Mounted

waste receptacle

14"

355mm

1-1/2"
40mm

Typ.

Interior

Hooks (4)

Removable

Vinyl Liner

11"

280mm

B-279

6"

150mm

2-1/2"
65mm

18"

455mm

14"

355mm

30'' 760mm

Recommended Mounting Height Off Floor

Materials:

Receptacle — 18-8 S, type-304 stainless steel with satin finish. Front and sides are one-piece, 22 gauge (0.8mm); back and bot­tom are one-piece, 26 gauge (0.5mm). All-welded construction. Top edge hemmed and bottom has recessed finger grip for safe
handling. Equipped with four spot-welded interior hooks for attaching the vinyl liner. Capacity: 6.4-gal. (24.2-L).

Liner — Heavy-gauge vinyl with four grommets. Removable for servicing.

operation:

Removable vinyl liner attaches to four interior hooks of waste receptacle. Space between bottom of receptacle and floor, when
unit is properly mounted on wall, facilitates floor cleaning.

installation:

Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dr y wall
construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For
other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle
bolts or expansion bolts.

specification:

Surface-mounted waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Front and sides of waste receptacle shall be one-piece, 22 gauge (0.8mm); back and bottom shall be one-piece, 26
gauge (0.5mm). Top edge shall be hemmed and bottom of waste receptacle shall have recessed finger grip. Waste receptacle
shall be equipped with four interior hooks, furnished with a removable heavy-gauge vinyl liner, and shall have a minimum
capacity of 6.4-gal. (24.2-L). Manufacturer’s service and parts manual shall be provided to the building owner/manager upon
request.

Surface-Mounted Waste Receptacle shall be Model B-279 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.