Technical Data
14"
355mm
S
S
2-1/8"
55mm
12-1/2"
320mm
35" to 39" 890 to 990mm
Recommended Mounting Height Off Floor
23"
585mm
16-1/2"
420mm
11"
280mm
S
S
Removable
Vinyl Liner
Finish Face of Wall
SURFACE-MOUNTED
B-275
WASTE RECEPTACLE
MATERIALS:
Receptacle — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edges are hemmed. Equipped with
four spot-welded interior hooks for attaching the vinyl liner. Stainless steel straps on back of unit reinforce the four mounting
screw holes. Capacity: 20-gal. (75.7-L).
Liner — Heavy-gauge vinyl with four grommets. Removable for servicing.
OPERATION:
Removable vinyl liner attaches to four interior hooks of waste receptacle. Bottom edges are hemmed for maximum safety. Space
between bottom of receptacle and floor when unit is mounted on wall facilitates floor cleaning.
INSTALLATION:
Mount unit to wall with four sheet-metal screws furnished by manufacturer at points indicated by an S. For plaster or dr y wall
construction, provide concealed backing to comply with local building codes and secure with screws furnished. For other wall
surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8'' (3mm) toggle
bolts or expansion bolts.
SPECIFICATION:
Surface-mounted waste receptacle shall be type-304, 22-gauge (0.8mm) stainless steel. Exposed surfaces shall have satin finish.
Waste receptacle shall be equipped with four interior hooks, have reinforced mounting screw holes, and shall be furnished with
a removable heavy-gauge vinyl liner. Unit shall have a capacity of 20-gal. (75.7-L). Manufacturer’s service and parts manual shall
be provided to the building owner/manager upon request.
Surface-Mounted Waste Receptacle shall be Model B-275 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2005 by Bobrick Washroom Equipment, Inc.
Loading...