Technical Data
double-roll
toilet tissue dispenser
b-27460
S
Lock & Key
S
5-1/4''
135mm
4-1/8''
105mm
2-1/4''
55mm
5/8''
16mm
Typ.
Recommended Mounting Height
Patented
1-3/4''
45mm
Typ.
S
3-5/16''
S
Mounting Bracket
85mm
Typ.
14-1/8''
360mm
Spindles
materials:
Bracket — Heavy-duty cast aluminum with satin finish. Equipped with a tumbler lock that is keyed like other Bobrick washroom accessories.
Spindles (2) — Molded high-impact ABS.
510mm
20-1/8''
for Universal/Barrier-Free Design
operation:
Accommodates two standard-core toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Tumbler lock secures spindles in
place; spindles can only be removed after unlocking with key furnished. Vandal-resistant.
installation:
For partitions with par ticle-board or other solid core, provide sheet-metal screws or through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed
back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws.
For masonry walls, provide sheet-metal screws and fiber plugs or expansion shields, or provide 1/8" (3mm) toggle bolts or
expansion bolts.
specification:
Double-roll toilet tissue dispenser shall have a heavy-duty cast-aluminum bracket with satin finish. Bracket shall be equipped
with a tumbler lock to secure spindles in place. Vandal-resistant spindles shall be molded high-impact ABS. Unit shall
accommodate two standard-core toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Manufacturer's ser vice and parts
manual shall be provided to the building owner/manager upon request.
Double-Roll Toilet Tissue Dispenser shall be Model B-27460 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...