Technical Data
double-roll
toilet tissue dispenser
4-7/8''
125mm
1-1/2''
40mm
4-1/8''
105mm
3/4''
19mm
1-1/2''
40mm
Typ.
3-1/2''
90mm
S
Typ.
S
b-2740
12-1/2''
320mm
S
S
Bracket
Spindles
19-3/4'' 500mm
Recommended Mounting Height
for Universal/Barrier-Free Design
materials:
Bracket — Heavy-duty cast aluminum with satin finish.
Spindles (2) — Molded high-impact ABS. Equipped with retractable pin and concealed locking mechanism.
operation:
Accommodates two standard-core toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Spindles can only be removed
with special key furnished. Theft-resistant.
installation:
For partitions with par ticle-board or other solid core, provide sheet-metal screws or through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed
back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws.
For other wall surfaces, provide sheet-metal screws and fiber plugs or expansion shields, or provide 1/8" (3mm) toggle bolts or
expansion bolts.
specification:
Double-roll toilet tissue dispenser shall have a heavy-duty cast-aluminum bracket with satin finish. Theft-resistant spindles shall
be molded high-impact ABS with retractable pins and concealed locking mechanisms. Unit shall accommodate two standardcore toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Manufacturer’s service and parts manual shall be provided to
the building owner/manager upon request.
Double-Roll Toilet Tissue Dispenser shall be Model B-2740 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...