Bobrick B-27313 User Manual

S

Lock

Lid

Cabinet

4-5/8''

120mm

14-7/8''
375mm

12-3/4''
325mm

5''

125mm

1-5/16''

25mm

Finish Face of Wall

or Surface

S

surface-mounted

Technical Data

three roll toilet

tissue dispenser

B-27313

materials:

Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All welded construction. Exposed sur faces have satin finish.

Lid — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Exposed surfaces have satin finish. Lid secured to cabinet with

hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories.

operation:

Unit holds 3 standard-core toilet tissue rolls up to 4-1/2" (120mm) maximum diameter. Tissue rolls are loaded into the cabinet
through the top. Extra roll shall be manually dropped in place when bottom roll is depleted.

installation:

Mount unit on partition with three #10 x 5/8" (M4.8x 16mm) sheet-metal screws (not furnished) at points indicated by an S. For
plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet­metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws or provide 3/16"
(5mm) toggle bolts or expansion bolts.

specification:

Surface-mounted three roll toilet tissue dispenser shall be type-304 stainless steel all-welded construction; exposed surfaces
shall have satin finish. Lid shall be secured to cabinet with a hinge and equipped with a tumbler lock keyed like other Bobrick
washroom accessories. Unit shall dispense three standerd-core toilet tissue rolls up to 4-1/2" (125mm). Extra roll shall be
manually dropped in place when bottom roll is depleted.

Surface-Mounted Three Roll Toilet Tissue Dispenser shall be Model B-27313 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-27313 Rev. 6/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.