
Technical Data
Finish Face of Wall
S
1-11/16''
45mm
Typ.
Recommended Mounting Height Off Floor
For Universal/Barrier-Free Design
25'' to 30'' 635 to 760mm
3-13/16''
95mm
7-1/2''
190mm
Hinged Lid
1-11/16''
45mm
Typ.
S
10''
255mm
Patented
ConturaSeries
®
SURFACE-MOUNTED
SANITARY NAPKIN DISPOSAL
B-270
MATERIALS:
Container — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces have satin
finish. Integral finger depression for opening cover. Front of container has same degree of arc as front of cover and other
Bobrick ConturaSeries washroom accessories. Radius on side edges of container match corners and edges of cover and other
ConturaSeries accessories.
Cover — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of
cover has same degree of arc as front of container and other Bobrick Contura Series washroom accessories. Radius on corners
and edges of cover match side edges of container and other Contura Series accessories. Secured to container with a full-length
stainless steel piano-hinge.
OPERATION:
Cover flips up for disposal of sanitary napkins and for servicing container. Disposable paper liners for the container are available
as an optional accessory: order Bobrick Part No. 270-12.
INSTALLATION:
For partitions with par ticle-board or other solid core, secure with two #8 x 3/4'' (4.2 x 19mm) sheet-metal screws (not
furnished) at all points indicated by an S, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed
back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle
bolts or expansion bolts.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws.
SPECIFICATION:
Surface-mounted sanitar y napkin disposal shall be type-304 stainless steel with all-welded constr uction; exposed surfaces shall
have satin finish. Front of sanitary napkin disposal shall have same degree of arc and match other Bobrick ConturaSeries
accessories in the washroom. Radius on corners and edges of sanitar y napkin disposal shall complement other Bobrick
ConturaSeries
®
washroom accessories. Cover shall be drawn, one-piece, seamless construction and secured to container with a
full-length stainless steel piano-hinge. Container shall have integral finger depression for opening cover. Manufacturer's service
and parts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Sanitar y Napkin Disposal shall be Model B-270 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
®
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.