SURFACE-MOUNTED
Technical Data
PAPER TOWEL
DISPENSER
10-13/16"
275mm
7-1/2"
S
190mm
S
Knob Latch
Door
Finish Face of Wall
3-15/16"
100mm
B-2621
S
7-1/8"
180mm
3-1/2"
90mm
S
2"
50mm
1475 to 1575mm
For Barrier-Free Design
58" to 62"
Recommended Mounting Height Off Floor
Recommended Mounting Height Off Floor
1195mm
47''
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed sur faces
have satin finish. Towel tray has hemmed opening to dispense paper towels without tearing.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless
steel piano-hinge. Equipped with a knob latch.
Optional: Order Bobrick Part No. 262-130 TowelMate™ available as on optional accessory. TowelMate accessory allows for
paper towels to dispense one at a time without bulging, sagging or falling through the towel tray opening. TowelMate fits
Gamco and most manufacturers' similar models.
OPERATION:
Unit dispenses C-fold and multifold paper towels 3-1/8" to 3-13/16" (79–97mm) deep. Slots in sides of cabinet indicate refill
time. Capacity: 200 C-fold or 275 multifold paper towels. To dispense narrower towels 2-1/2" to 3-1/8" (64–79mm) deep, order
optional TowelMate accessory Bobrick Par t No. 262-130.
INSTALLATION:
Mount unit on wall with four #10 x 1-1/4" (4.8 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For
plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheetmetal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded constr uction; exposed surfaces shall
have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a knob latch.
Paper towel tray shall have hemmed opening to dispense paper towels without tearing. Unit shall be capable of dispensing 200
C-fold or 275 multifold paper towel measuring 3-1/8" to 3-13/16" (79 to 97mm) deep. Narrower paper towels 2-1/2" to 3-1/8"
(65 to 79mm) deep may be efficiently dispensed with the use of an optional TowelMate accessory, Bobrick Part No. 262-130.
TowelMate accessory allows for paper towels to dispense one at a time without bulging, sagging or falling through the towel
tray opening.
Surface-Mounted Paper Towel Dispenser shall be Model B-2621 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 7/1/10
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
R/B, S/C
Printed in U.S.A.
Loading...